Systeeminen muotoiluajattelu keskustelua ja vaikuttamista tukevan työkalun kehittämisen keinona : case FinnGen-tutkimushanke
Sydänmaa, Piia (2021)
Sydänmaa, Piia
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2021112822218
https://urn.fi/URN:NBN:fi:amk-2021112822218
Tiivistelmä
Opinnäytetyö käsittelee työkalun rakentamista keskustelun ja vaikuttamisen tueksi. Työssä kuvataan työkalun rakentamista mahdollisimman laajasti FinnGen-tutkimushankkeen kenttää hankkeen osapuolten, tutkimushankkeen tiedon hyödyntäjien ja tutkimustyötä tekevien tutkijoiden näkökulmasta. Työkalun tarkoituksena on auttaa kommunikoimaan toimintakentän haasteista ja mahdollisuuksista eri osapuolten näkökulmasta niin FinnGen-konsortion sisällä kuin koko alan verkostoissakin, jotta genomitutkimuksen toimintaedellytykset Suomessa säilyisivät ja FinnGen-tutkimushankkeen tulevaisuuden vaihtoehtoja voidaan miettiä.
Työssä sovellettiin ja yhdistettiin muotoiluajattelun ja systeemisen muotoiluajattelun luovia prosesseja. Laadullisten puolistrukturoitujen haastattelujen ja yhteiskehittämisen avulla kompleksisesta toimintakentästä kerättiin tietoa, jota tarkennettiin ja täydennettiin iteratiivisen prosessin aikana. Haastatteluissa hyödynnettiin visuaalista stimulusta. Haastateltavina olivat FinnGen-hankkeen osapuolia, syntyvän aineiston tiedon hyödyntäjiä ja tutkimustyötä tekeviä tutkijoita. Haastattelut purettiin kuuntelemalla nauhoitteet ja pilkkomalla tieto helposti käsiteltäviin kokonaisuuksiin. Kertynyt tieto analysoitiin samankaltaisuuskaavion avulla ja informaatio muotoiltiin GIGA-karttaan.
Opinnäytetyön tuloksina kertyi laaja-alainen ymmärrys eri tahojen näkökulmasta. Kertyneestä tiedosta syntyi GIGA-kartta, jonka toteutus oli perinteisestä yhden ison kuvan kokonaisuudesta poiketen työkalumainen kokonaisuus. Rakennettua GIGA-karttaa voidaan käyttää keskustelun ja vaikuttamisen tukena, kun luodaan yhteistä ymmärrystä ja kehitetään FinnGen-hankkeen yhteistyötä ja toimintaa. GIGA-kartan tiedon pohjalta syntyi myös idea toimialan yhteisestä genomitutkimuksen lobbaajasta kansallisella ja kansainvälisellä tasolla. The thesis deals with building a tool to support discussion and influence. The paper describes the construction of the tool in the field of the FinnGen research project as broadly as possible from the perspective of the project parties, the users of the research project's knowledge and the researchers doing the research. The purpose of the tool is to help communicate the challenges and opportunities in the field from the perspective of different parties, both within the FinnGen consortium and in the entire industry networks, so that the operating conditions for genome research in Finland are maintained and future alternatives for the FinnGen research project can be considered.
The creative processes of design thinking and systemic design thinking were applied and combined in the work. Through qualitative semi-structured interviews and co-development, information was collected from the complex field of action, which was refined and supplemented during the iterative process. Visual stimuli were used in the interviews. The interviewees were the parties to the FinnGen project, the users of the information in the resulting material and the researchers. The interviews were dismantled by listening to the recordings and breaking up the information into easy-to-handle entities. The accumulated data were analyzed using affinity diagram and the information was formatted into a GIGA-map.
As a result of the thesis, a broad understanding was gained from the perspective of different parties. The accumulated data resulted in a GIGA-map, the implementation of which was a tool-like entity, unlike the traditional entity of one large image. The built GIGA-map can be used to support discussion and influence when creating a common understanding and developing the cooperation and activities of the FinnGen project. Based on the information in the GIGA-map, the idea of a joint lobbyist for genome research in the industry at the national and international level also emerged.
Työssä sovellettiin ja yhdistettiin muotoiluajattelun ja systeemisen muotoiluajattelun luovia prosesseja. Laadullisten puolistrukturoitujen haastattelujen ja yhteiskehittämisen avulla kompleksisesta toimintakentästä kerättiin tietoa, jota tarkennettiin ja täydennettiin iteratiivisen prosessin aikana. Haastatteluissa hyödynnettiin visuaalista stimulusta. Haastateltavina olivat FinnGen-hankkeen osapuolia, syntyvän aineiston tiedon hyödyntäjiä ja tutkimustyötä tekeviä tutkijoita. Haastattelut purettiin kuuntelemalla nauhoitteet ja pilkkomalla tieto helposti käsiteltäviin kokonaisuuksiin. Kertynyt tieto analysoitiin samankaltaisuuskaavion avulla ja informaatio muotoiltiin GIGA-karttaan.
Opinnäytetyön tuloksina kertyi laaja-alainen ymmärrys eri tahojen näkökulmasta. Kertyneestä tiedosta syntyi GIGA-kartta, jonka toteutus oli perinteisestä yhden ison kuvan kokonaisuudesta poiketen työkalumainen kokonaisuus. Rakennettua GIGA-karttaa voidaan käyttää keskustelun ja vaikuttamisen tukena, kun luodaan yhteistä ymmärrystä ja kehitetään FinnGen-hankkeen yhteistyötä ja toimintaa. GIGA-kartan tiedon pohjalta syntyi myös idea toimialan yhteisestä genomitutkimuksen lobbaajasta kansallisella ja kansainvälisellä tasolla.
The creative processes of design thinking and systemic design thinking were applied and combined in the work. Through qualitative semi-structured interviews and co-development, information was collected from the complex field of action, which was refined and supplemented during the iterative process. Visual stimuli were used in the interviews. The interviewees were the parties to the FinnGen project, the users of the information in the resulting material and the researchers. The interviews were dismantled by listening to the recordings and breaking up the information into easy-to-handle entities. The accumulated data were analyzed using affinity diagram and the information was formatted into a GIGA-map.
As a result of the thesis, a broad understanding was gained from the perspective of different parties. The accumulated data resulted in a GIGA-map, the implementation of which was a tool-like entity, unlike the traditional entity of one large image. The built GIGA-map can be used to support discussion and influence when creating a common understanding and developing the cooperation and activities of the FinnGen project. Based on the information in the GIGA-map, the idea of a joint lobbyist for genome research in the industry at the national and international level also emerged.