Turvajärjestelmän suunnittelu opetuskäyttöön
Vänni, Tuomas (2020)
Vänni, Tuomas
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020121728970
https://urn.fi/URN:NBN:fi:amk-2020121728970
Tiivistelmä
Opinnäytetyön tavoitteena oli suunnitella turvajärjestelmä opetuskäyttöön Hämeen ammattikorkeakoulun Valkeakosken kampukselle, käyttäen standardien mukaisia ohjeita. Tavoitteena oli myös, että turvajärjestelmä voidaan toistaa opinnäytetyön avulla.
Opinnäytetyön aikana käydään läpi turvajärjestelmiin liittyviä standardeja. Opinnäytetyössä käsitellään tarkasti riskinarviointia ja turvallisuuden tason määrittelyä. Riskinarviointia tarkastellaan standardien EN ISO 13849-1 ja EN IEC 62061 avulla. Opinnäytetyön aikana esitellään turvajärjestelmiin liittyviä komponentteja, sekä käydään TwinCAT 3- ja TwinSAFE-ohjelmointia läpi.
Opinnäytetyön aikana saadaan hyvä käsitys turvajärjestelmien standardeista ja huomataan, kuinka vaativia ne ovat. Työn lopputuloksena on oikein suunniteltu ja toteutettu turvajärjestelmä, joka on tehty käyttäen turvavalopuomeja. Uskon opinnäytetyöstä olevan hyötyä opiskelijoille turvajärjestelmiin tutustumisessa. The aim of the project was to design a safety system for educational purposes to the use of Häme University of Applied Sciences Valkeakoski campus by using instructions defined in the standards of the machine safety. The aim was that the safety system could be replicated with the help of the project.
During the project, standards related to safety systems were examined. This thesis studies risk assessment and determines the safety level of a safety system in detail. Risk assessment is examined using the standards EN ISO 1349-1 and EN IEC 62061. During the project, common components related to safety systems and programming with TwinCAT 3 and TwinSAFE were studied.
During the project, a good understanding of the standards of the safety systems was gained by the author and this thesis also illustrates how demanding they are. The result of the project is a properly designed and built safety system, made using safety light barriers. I believe that this thesis will be useful for engineering students when getting acquainted with safety systems.
Opinnäytetyön aikana käydään läpi turvajärjestelmiin liittyviä standardeja. Opinnäytetyössä käsitellään tarkasti riskinarviointia ja turvallisuuden tason määrittelyä. Riskinarviointia tarkastellaan standardien EN ISO 13849-1 ja EN IEC 62061 avulla. Opinnäytetyön aikana esitellään turvajärjestelmiin liittyviä komponentteja, sekä käydään TwinCAT 3- ja TwinSAFE-ohjelmointia läpi.
Opinnäytetyön aikana saadaan hyvä käsitys turvajärjestelmien standardeista ja huomataan, kuinka vaativia ne ovat. Työn lopputuloksena on oikein suunniteltu ja toteutettu turvajärjestelmä, joka on tehty käyttäen turvavalopuomeja. Uskon opinnäytetyöstä olevan hyötyä opiskelijoille turvajärjestelmiin tutustumisessa.
During the project, standards related to safety systems were examined. This thesis studies risk assessment and determines the safety level of a safety system in detail. Risk assessment is examined using the standards EN ISO 1349-1 and EN IEC 62061. During the project, common components related to safety systems and programming with TwinCAT 3 and TwinSAFE were studied.
During the project, a good understanding of the standards of the safety systems was gained by the author and this thesis also illustrates how demanding they are. The result of the project is a properly designed and built safety system, made using safety light barriers. I believe that this thesis will be useful for engineering students when getting acquainted with safety systems.