Varaosien varastointijärjestelmän rakentaminen : Finnsiirto Oy
Leppinen, Juha (2019)
Leppinen, Juha
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019062617538
https://urn.fi/URN:NBN:fi:amk-2019062617538
Tiivistelmä
Tämän toiminnallisen opinnäytetyön tavoitteena oli järjestää varaosat työkoneiden valmistajien ja osien kategorioiden mukaan ja tehdä niille selkeät hyllypaikat. Tarkoituksena oli rakentaa Finnsiirto Oy:lle toimiva varaosien varastointijärjestelmä, jotta uusi varasto olisi toimiva ja hyllytilat olisi käytetty mahdollisimman tehokkaasti. Tarkoituksena oli myös jättää hieman laajennusvaraa. Opinnäytetyön toimeksiantaja oli Finnsiirto Oy.
Toimivassa varastointijärjestelmässä tulisi olla niin selkeät hyllypaikat ja hyllymerkinnät jokaiselle tuotteelle, jotta ulkopuolinenkin henkilö osaisi hakea oikean tuotteen pelkällä hyllypaikan numerolla ja tuotekoodilla. Uusien hyllypaikkojen on tarkoitus olla johdonmukaisia ja selkeitä. Finnsiirrolla ei ollut aikaisemmin minkäänlaisia hyllypaikkoja, joten tässä opinnäytetyössä käydään vaihe vaiheelta läpi hyllypaikkojen uudelleen organisointi ja varastointijärjestelmän rakentaminen. Kaikki osat levitetään laajalle alueelle ja tunnistetaan ulkonäön ja varaosakoodin avulla, jonka jälkeen ne järjestetään omille hyllypaikoille. Samaan aikaan tehdään Excel-taulukko jokaisesta varaosasta. Taulukosta nähdään muun muassa varaosanumero, määrä sekä yhteishinta.
Työn tuotoksena saadaan uusi varastointijärjestelmä Finnsiirto Oy:lle. Varaston toimivuudessa havaitaan selkeitä parannuksia, koska ennen varaosat olivat hyllyissä ilman järjestystä ja etsimiseen meni paljon aikaa ja uusia varaosia tilattiin turhaan. Uuden varaston ansiosta työkoneet saadaan nopeammin kuntoon ja asiakkaita pystytään palvelemaan paremmin. The purpose of this functional thesis was to arrange the spare parts according to the categories of the manufacturers and parts and to make clear shelf locations for them. The purpose was to build a working warehouse system of spare parts for Finnsiirto Oy so that the new warehouse would operate well, and the shelf locations would be used as effectively as possible. The purpose was also to leave some room for expansion. The thesis was commissioned by Finnsiirto Oy.
In a working storage system, there should be such a clear shelf locations and labels for each product, so that an outside person can retrieve the right product with just a shelf number and product code. The new shelves are meant to be consistent and clear. The Finnsiirto Oy did not have any shelf locations in the past, so this thesis is going through the reorganization of shelf locations and the construction of the storage system step by step. All parts are spread over a wide area and identified with their appearance and spare part code, after which they are arranged in their own shelf locations. At the same time, an Excel sheet is filled with information about each spare part. The sheet shows, for example, the product code, the amount and the total price.
The result of this work is a new storage system for Finnsiirto Oy. There are clear improvements in warehouse performance, because before the spare parts were on the shelves without order and searching took a lot of time and new spare parts were ordered unnecessarily. Thanks to the new warehouse, the machines can be repaired faster, and the customers can be served better.
Toimivassa varastointijärjestelmässä tulisi olla niin selkeät hyllypaikat ja hyllymerkinnät jokaiselle tuotteelle, jotta ulkopuolinenkin henkilö osaisi hakea oikean tuotteen pelkällä hyllypaikan numerolla ja tuotekoodilla. Uusien hyllypaikkojen on tarkoitus olla johdonmukaisia ja selkeitä. Finnsiirrolla ei ollut aikaisemmin minkäänlaisia hyllypaikkoja, joten tässä opinnäytetyössä käydään vaihe vaiheelta läpi hyllypaikkojen uudelleen organisointi ja varastointijärjestelmän rakentaminen. Kaikki osat levitetään laajalle alueelle ja tunnistetaan ulkonäön ja varaosakoodin avulla, jonka jälkeen ne järjestetään omille hyllypaikoille. Samaan aikaan tehdään Excel-taulukko jokaisesta varaosasta. Taulukosta nähdään muun muassa varaosanumero, määrä sekä yhteishinta.
Työn tuotoksena saadaan uusi varastointijärjestelmä Finnsiirto Oy:lle. Varaston toimivuudessa havaitaan selkeitä parannuksia, koska ennen varaosat olivat hyllyissä ilman järjestystä ja etsimiseen meni paljon aikaa ja uusia varaosia tilattiin turhaan. Uuden varaston ansiosta työkoneet saadaan nopeammin kuntoon ja asiakkaita pystytään palvelemaan paremmin.
In a working storage system, there should be such a clear shelf locations and labels for each product, so that an outside person can retrieve the right product with just a shelf number and product code. The new shelves are meant to be consistent and clear. The Finnsiirto Oy did not have any shelf locations in the past, so this thesis is going through the reorganization of shelf locations and the construction of the storage system step by step. All parts are spread over a wide area and identified with their appearance and spare part code, after which they are arranged in their own shelf locations. At the same time, an Excel sheet is filled with information about each spare part. The sheet shows, for example, the product code, the amount and the total price.
The result of this work is a new storage system for Finnsiirto Oy. There are clear improvements in warehouse performance, because before the spare parts were on the shelves without order and searching took a lot of time and new spare parts were ordered unnecessarily. Thanks to the new warehouse, the machines can be repaired faster, and the customers can be served better.