Hydrodeoxygenation of isoeugenol over Ni-SBA-15: Kinetics and modelling

Sebastiano Tieuli, Päivi Mäki-Arvela, Markus Peurla, Kari Eränen, Johan Wärnå, Giuseppe Cruciani, Federica Menegazzo, Dmitry Murzin, Michela Signoretto

Research output: Contribution to journalArticleScientificpeer-review

34 Citations (Scopus)
13 Downloads (Pure)

Abstract

Hydrodeoxygenation (HDO) of isoeugenol has been investigated over Ni-SBA-15 and Ni-SZ-SBA-15 containing sulfated ZrO2 with Si/Zr molar ratio of 8.4. The catalysts were prepared via incipient wetness method and characterized by N2 adsorption, AAS, TPR, X-ray diffraction (XRD), thermal gravimetric/differential thermal analyses (TG-DTA), organic elemental analysis, pyridine adsorption-desorption with Fourier-transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The results revealed that 75% yield of propylcyclohexane was obtained over a non acidic Ni-SBA-15 in isoeugenol HDO at 300 °C under 3 MPa H2 using dodecane as a solvent. Ni-SZ-SBA-15 gave only very low HDO activity, which is explained by location of the acid sites both inside and outside SBA-15, whereas nickel particles were partially located inside the SBA-15 structure. On the other hand Ni particles in Ni-SBA-15 with the size of 20 nm were located outside SBA-15 promoting HDO. The kinetic model was developed for HDO of isoeugenol based on the proposed reaction network, which took into account formation of intermediate products as well as oligomers. The developed kinetic model was capable of describing well the experimental data with the degree of explanation equal to 91%. The activation energy for hydrogenation of propylcyclohexene and for demethoxylation of dihydroeugenol to 4-propylphenol are equal to 92 kJ/mol and 62 kJ/mol, respectively.

Original languageUndefined/Unknown
Pages (from-to)1–10
JournalApplied Catalysis A: General
Volume580
DOIs
Publication statusPublished - 2019
MoE publication typeA1 Journal article-refereed

Cite this