The mechanical and geometrical properties of fibrous structures
This thesis deals with both random and regular (woven) fibre networks. An effective medium theory for the tensile stiffness of two-dimensional random fibre networks is presented. The theory is extended to three-dimensional networks with some but not too strong restrictions. This generalisation involves the computationally determined fraction of bonded crossings in the two-dimensional projection of the three-dimensional network. The two-dimensional and three-dimensional versions of the theory are both succesfully tested against numerical simulations. The porosity of the three-dimensional random fibre networks is found to be given by a numerically determined scaling function, which upon rescaling is shown to be similar to the fraction of bonded crossings described above. This function thus seems to determine the entire structure and mechanical behaviour of randomly deposited fibre mats. A numerical model for the mechanical equilibration of woven fibre networks is also presented. Structures generated by this model are tested against industrially manufactured fabrics. This comparison shows that the model gives fairly realistic results, which guarantees its usefulness also in industrial applications.
...
ISBN
978-951-39-9493-8Julkaisuun sisältyy osajulkaisuja
- Artikkeli I: Mäkinen, J., Timonen, J., Åström, J. A., & Alava, M. J. (2000). Elasticity of Poissonian fiber networks. Physical Review E, 61, 5550. DOI: 10.1103/PhysRevE.61.5550
- Artikkeli 1A: Mäkinen, J., Timonen, J., Åström, J. A., & Alava, M. J. (2000). Erratum: Elasticity of Poissonian fiber networks. Physical Review E, 62, 5862. DOI: 10.1103/PhysRevE.62.5862
- Artikkeli II: Åström, J. A., Mäkinen, J. P., Hirvonen, H., and Timonen, J. (2000). Stiffness of compressed fiber mats. Journal of Applied Physics, 88, 5056. DOI: 10.1063/1.1315622
- Artikkeli III: Åström, J. A., Latva-Kokko, M., Kähkönen, S., Mäkinen, J. P. & Timonen, J. (2003). The role of connectivity in the properties of sedimented materials. Granular Matter, 5, 99–103. DOI: 10.1007/s10035-003-0131-0
- Artikkeli IV: Åström, J. A., Mäkinen, J. P. and Timonen, J. (2001). Modeling multilayer woven fabrics. Applied Physics Letters, 79, 180. DOI: 10.1063/1.1385350
- Artikkeli V: Mäkinen, J. P., Åström, J. A. and Timonen, J. (2000). A Relaxation Model for Multi-Layered Woven Fabrics. P roceedings of ECCOMAS 2000.
Metadata
Näytä kaikki kuvailutiedotKokoelmat
- Väitöskirjat [3446]
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
Do bone geometric properties of the proximal femoral diaphysis reflect loading history, muscle properties, or body dimensions?
Niinimäki, Sirpa; Narra, Nathaniel; Härkönen, Laura; Abe, Shinya; Nikander, Riku; Hyttinen, Jari; Knüsel, Christopher J.; Sievänen, Harri (John Wiley & Sons, Inc., 2019)Objectives The aim of this study was to investigate activity-induced effects from bone geometric properties of the proximal femur in athletic vs nonathletic healthy females by statistically controlling for variation in ... -
Impaired geometric properties of tibia in older women with hip fracture history
Mikkola, Tuija; Sipilä, Sarianna; Portegijs, Erja; Kallinen, Mauri; Alén, Markku; Kiviranta, Ilkka; Pekkonen, Mika; Heinonen, Ari (2007)Introduction The purpose of this study was to evaluate side-to-side differences in tibial mineral mass and geometry after hip fracture, and to assess the determinants of such differences. Methods Thirty-eight 60- to ... -
Achilles tendon viscoelastic properties and mechanical responses to a single bout of exercise
Peltonen, Jussi (University of Jyväskylä, 2014) -
Comparison of mechanical properties and composition of magnetron sputter and plasma enhanced atomic layer deposition aluminum nitride films
Sippola, Perttu; Perros, Alexander Pyymaki; Ylivaara, Oili M. E.; Ronkainen, Helena; Julin, Jaakko; Liu, Xuwen; Sajavaara, Timo; Etula, Jarkko; Lipsanen, Harri; Puurunen, Riikka L. (AIP Publishing LLC, 2018)A comparative study of mechanical properties and elemental and structural composition was made for aluminum nitride thin films deposited with reactive magnetron sputtering and plasma enhanced atomic layer deposition (PEALD). ...
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.