Weakening of tensile strength of granitic rock by HV-HF-AC actuation of piezoelectric properties of Quartz : a 3D numerical study
Saksala, Timo; Rubio Ruiz, Arturo; Kane, Pascal-Alexandre; Hokka, Mikko (2023)
Saksala, Timo
Rubio Ruiz, Arturo
Kane, Pascal-Alexandre
Hokka, Mikko
IOP Publishing
2023
Rock and Fracture Mechanics in Rock Engineering and Mining
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:tuni-202303293269
https://urn.fi/URN:NBN:fi:tuni-202303293269
Kuvaus
Peer reviewed
Tiivistelmä
High-voltage and high-frequency alternating current (HV-HF-AC) excitation of piezoelectric properties of Quartz is a potential method to induce cracks in granite. This was recently shown in a numerical feasibility study [6], where cracking was induced on cylindrical rock samples made of granite by sinusoidal AC excitation at the frequency of ~100 kHz and the amplitude of ~10 kV. However, this study did not investigate the weakening effect due to this cracking on the tensile strength of the sample. The present study addresses this topic numerically. For this end, a numerical method based on 3D embedded discontinuity finite elements for rock fracture and an explicit time stepping scheme to solve the coupled piezoelectro-mechanical problem is adopted. Rock heterogeneity and anisotropy are accounted for at the mineral mesotructure level. A preliminary numerical simulation demonstrates that the HV-HF-AC treatment reduces the tensile strength of a cylindrical granite sample by 12 %, making it thus a potential non-conventional pre-treatment method in comminution and excavation of Quartz bearing rocks and ores.
Kokoelmat
- TUNICRIS-julkaisut [16726]