Konepajan materiaalivirran kehitys layoutsuunnittelun ja konekannan tarkastelun avulla
Järvinen, Paavo (2020)
Järvinen, Paavo
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202003123371
https://urn.fi/URN:NBN:fi:amk-202003123371
Tiivistelmä
Opinnäytetyössä selvitetään mahdollisuuksia parantaa Astepa Oy:n konepajan
materiaalivirtaa layoutsuunnittelun ja konekannan tarkastelun avulla. Samalla konepajan
konekannasta luotiin sähköinen konekortisto konekannan huollettavuuden
ja ylläpidon parantamiseksi. Astepa Oy:n konepaja toimii teollisuuden kunnossapidon
tukevien toimintojen keskustana. Työn avulla etsittiin konepajan materiaalivirrasta
epäjatkuvuuskohtia ja niiden syitä ja pyrittiin luomaan toimivia kehitysehdotuksia
epäjatkuvuuskohtien poistamiseksi. Opinnäytetyö painottuu konepajan
layoutin ja konekannan tarkasteluun ja kehittämiseen.
Opinnäytetyössä käytettiin Lean-ajattelun keinoja epäjatkuvuuskohtien löytämiseksi
toiminnasta. Tämän Lean-ajattelun pohjalta tutkittiin nykyisen layoutin
toimintaa ja konepajan materiaalivirtoja. Nykyinen layout kartoitettiin ja siitä valmistettiin
sähköisessä muodossa oleva layout-piirustus. Laitepisteiden väliset
riippuvuudet kartoitettiin ja tämän pohjalta piirrettiin nykyisen layoutin materiaalivirtaus.
Materiaalivirtaa analysoitiin REL-analysoinnilla. Tämän pohjalta luotiin
muutosehdotuksia nykyiseen layoutiin. Materiaalivirrasta selvitettiin myös konekannan
vaikutukset ja pohdittiin konekannan aiheuttamia hukkia toiminnassa.
Näiden hukkien perusteella luotiin suositukset muutosten tekemiseksi konekantaan
toiminnan kehittämiseksi. Konekannasta luotiin sähköinen konekortisto, joka
löytyy yhteiseltä palvelimelta. Konekortistoon kerättiin koneiden ja laitteistojen
perustiedot, huoltosuunnitelmat ja huoltopäiväkirjat. Tämä konekortisto yhdistettiin
layoutpiirustukseen, jolloin työpistettä klikkaamalla saadaan auki kyseisen
laitteiston konekortisto ja tiedot nopeasti hyödynnettäväksi.
Opinnäytetyön tuloksina saatiin muutosehdotuksia konepajan layoutiin ja konekantaan,
ja jatkokehitysehdotuksia konepajan toiminnan edelleen parantamiseksi.
Tulokset esitettiin layoutpiirustuksin ja taulukoinnin avulla. Näiden kehitysehdotusten
toteutuksen suunnittelua jatketaan yrityksen sisällä. The goal of this thesis was to find ways to improve Astepa Ltd’s engineering
workshops material flow through layout design and machinery review. At the
same time, an electronic machinery catalogue was created from the engineering
workshop fleet to improve the maintenance and maintenance of the machine
fleet. Astepa Ltd's engineering workshop is the center of support activities for
industrial maintenance. Through this work, points of discontinuity and their
causes were searched for in the material flow of the engineering workshop, and
efforts were made to develop viable development proposals to eliminate discontinuity
points. The thesis focuses on examining and developing the layout and
fleet of the engineering workshop.
The thesis used the means of Lean thinking to find points of discontinuity in operation.
Based on this Lean concept, the operation of the current layout and the
material flows of the engineering workshop were studied. The current layout was
mapped and made into a layout drawing in electronic format. The dependencies
between the device points were mapped and based on this the material flow of
the current layout was drawn. Material flow was analyzed by REL-analysis. Based
on this, changes to the current layout were created. The effects of the machinery
base were also studied from the material flow, and the losses caused by the machinery
base in operation were considered. Based on these wastes, recommendations
were made for making changes to the machinery base to improve operations.
An electronic machinery catalogue was created from the machine base
and can be found on a shared server. The machinery catalogue included basic
information of the machinery and equipment, maintenance plans and maintenance
logs. This machinery catalogue was combined with the layout drawing,
whereby clicking on the workstation opens the machines catalog and the data of
the respective equipment for quick utilization.
As a result of the thesis, suggestions were made for changes in the layout and
machine base of the workshop, and further development suggestions for further
improving the operations of the engineering workshop. The results were presented
with layout drawings and tabulation. Planning to implement these development
proposals will continue within the company.
materiaalivirtaa layoutsuunnittelun ja konekannan tarkastelun avulla. Samalla konepajan
konekannasta luotiin sähköinen konekortisto konekannan huollettavuuden
ja ylläpidon parantamiseksi. Astepa Oy:n konepaja toimii teollisuuden kunnossapidon
tukevien toimintojen keskustana. Työn avulla etsittiin konepajan materiaalivirrasta
epäjatkuvuuskohtia ja niiden syitä ja pyrittiin luomaan toimivia kehitysehdotuksia
epäjatkuvuuskohtien poistamiseksi. Opinnäytetyö painottuu konepajan
layoutin ja konekannan tarkasteluun ja kehittämiseen.
Opinnäytetyössä käytettiin Lean-ajattelun keinoja epäjatkuvuuskohtien löytämiseksi
toiminnasta. Tämän Lean-ajattelun pohjalta tutkittiin nykyisen layoutin
toimintaa ja konepajan materiaalivirtoja. Nykyinen layout kartoitettiin ja siitä valmistettiin
sähköisessä muodossa oleva layout-piirustus. Laitepisteiden väliset
riippuvuudet kartoitettiin ja tämän pohjalta piirrettiin nykyisen layoutin materiaalivirtaus.
Materiaalivirtaa analysoitiin REL-analysoinnilla. Tämän pohjalta luotiin
muutosehdotuksia nykyiseen layoutiin. Materiaalivirrasta selvitettiin myös konekannan
vaikutukset ja pohdittiin konekannan aiheuttamia hukkia toiminnassa.
Näiden hukkien perusteella luotiin suositukset muutosten tekemiseksi konekantaan
toiminnan kehittämiseksi. Konekannasta luotiin sähköinen konekortisto, joka
löytyy yhteiseltä palvelimelta. Konekortistoon kerättiin koneiden ja laitteistojen
perustiedot, huoltosuunnitelmat ja huoltopäiväkirjat. Tämä konekortisto yhdistettiin
layoutpiirustukseen, jolloin työpistettä klikkaamalla saadaan auki kyseisen
laitteiston konekortisto ja tiedot nopeasti hyödynnettäväksi.
Opinnäytetyön tuloksina saatiin muutosehdotuksia konepajan layoutiin ja konekantaan,
ja jatkokehitysehdotuksia konepajan toiminnan edelleen parantamiseksi.
Tulokset esitettiin layoutpiirustuksin ja taulukoinnin avulla. Näiden kehitysehdotusten
toteutuksen suunnittelua jatketaan yrityksen sisällä.
workshops material flow through layout design and machinery review. At the
same time, an electronic machinery catalogue was created from the engineering
workshop fleet to improve the maintenance and maintenance of the machine
fleet. Astepa Ltd's engineering workshop is the center of support activities for
industrial maintenance. Through this work, points of discontinuity and their
causes were searched for in the material flow of the engineering workshop, and
efforts were made to develop viable development proposals to eliminate discontinuity
points. The thesis focuses on examining and developing the layout and
fleet of the engineering workshop.
The thesis used the means of Lean thinking to find points of discontinuity in operation.
Based on this Lean concept, the operation of the current layout and the
material flows of the engineering workshop were studied. The current layout was
mapped and made into a layout drawing in electronic format. The dependencies
between the device points were mapped and based on this the material flow of
the current layout was drawn. Material flow was analyzed by REL-analysis. Based
on this, changes to the current layout were created. The effects of the machinery
base were also studied from the material flow, and the losses caused by the machinery
base in operation were considered. Based on these wastes, recommendations
were made for making changes to the machinery base to improve operations.
An electronic machinery catalogue was created from the machine base
and can be found on a shared server. The machinery catalogue included basic
information of the machinery and equipment, maintenance plans and maintenance
logs. This machinery catalogue was combined with the layout drawing,
whereby clicking on the workstation opens the machines catalog and the data of
the respective equipment for quick utilization.
As a result of the thesis, suggestions were made for changes in the layout and
machine base of the workshop, and further development suggestions for further
improving the operations of the engineering workshop. The results were presented
with layout drawings and tabulation. Planning to implement these development
proposals will continue within the company.