Betonin koekuutiopuristimen automatisointi
Karlsson, Markus (2019)
Karlsson, Markus
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201904205619
https://urn.fi/URN:NBN:fi:amk-201904205619
Tiivistelmä
Tässä työssä oli tarkoitus suunnitella ja toteuttaa betonialan yritykselle jo olemassa olevan laitteen modernisointi. Tämänpäivän betonimassojen valmistuksessa sen testaamisen tarve kasvaa. Vaikka yrityksessä on lujuuden testaamiseen tarkoitettu koekuutiopuristin, on se käytettävyydeltään ja toimintavarmuudeltaan jo vanhentunut. Siksi tuon laitteen modernisointi katsottiin aiheelliseksi.
Puristin on alunperin suunniteltu mobiililaitteeksi. Koska laitteen kapasiteetti on melko pieni ja nykystandardien mukaista toimintaa ei sillä enää saavuteta automatisoinnista huolimatta, on työssä mukana myös uuden ja isomman puristinrungon suunnittelua. Tämä osa työstä tosin on automatisoinnin jälkeistä työn jatkojalostamista, mutta ohjausjärjestelmän puolesta toteutettavissa oleva uudistus.
Työn tavoitteena oli suunnitella ohjausjärjestelmä, jota käyttämällä työ helpottuu ja tulosten luotettavuus kasvaa. The purpose of this work was to plan and implement the modernization of an existing device for a concrete company. Nowadays, in the manufacture of concrete masses, the need for testing it is increasing. Although the company has a test cube press for strength testing, it is already out of date with its usability and reliability. Therefore, the modernization of that device was considered appropriate.
The press was originally designed as a mobile device. Since the capacity of the device is rather small and the operation according to the current standards is no longer achieved despite the automation, the work also includes the design of a new and larger press body. This part of the work, however, is the post-automation process of further processing, but it is a feasible reform for the control system.
The aim of the work was to design a control system that makes the work easier and the reliability of the results increases.
Puristin on alunperin suunniteltu mobiililaitteeksi. Koska laitteen kapasiteetti on melko pieni ja nykystandardien mukaista toimintaa ei sillä enää saavuteta automatisoinnista huolimatta, on työssä mukana myös uuden ja isomman puristinrungon suunnittelua. Tämä osa työstä tosin on automatisoinnin jälkeistä työn jatkojalostamista, mutta ohjausjärjestelmän puolesta toteutettavissa oleva uudistus.
Työn tavoitteena oli suunnitella ohjausjärjestelmä, jota käyttämällä työ helpottuu ja tulosten luotettavuus kasvaa.
The press was originally designed as a mobile device. Since the capacity of the device is rather small and the operation according to the current standards is no longer achieved despite the automation, the work also includes the design of a new and larger press body. This part of the work, however, is the post-automation process of further processing, but it is a feasible reform for the control system.
The aim of the work was to design a control system that makes the work easier and the reliability of the results increases.