Levyteollisuuden pinnoitustehtaan ilmanvaihdon energiatehokkuuden parantaminen
Mörttinen, Ari-Pekka (2022)
Diplomityö
Mörttinen, Ari-Pekka
2022
School of Energy Systems, Energiatekniikka
Kaikki oikeudet pidätetään.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2022041429181
https://urn.fi/URN:NBN:fi-fe2022041429181
Tiivistelmä
Diplomityössä tarkasteltiin Koskisen Oy:n pinnoitustehtaan ilmanvaihdon energiatehokkuuden parantamista hyödyntämällä poistoilmasta saatavaa lämpöä tuloilman esilämmityksessä. Kohteessa on ennestään asennettuna neulalämmönvaihtimet ilmanvaihdon tulo- ja poistopuolella, mutta hyvin likaisten poistoilmanvirtojen vuoksi poistolämmönvaihtimet eivät toimi odotetulla tavalla. Lisäksi tarkasteltiin pinnoitustehtaalla sijaitsevien kompressorien tuottaman lämmön hyödyntämistä kiinteistön lämmitysverkostossa.
Ilmanvaihdon laskelmia varten hyödynnettiin saatavilla olevia pinnoitustehtaan lämpötila- ja suhteellisen kosteuden tietoja sekä ulkoisen konsultointiyrityksen tietoja ilmanvaihdon virtauksesta. Ulkolämpötilan ja kosteuden arviointiin käytettiin Ilmatieteenlaitoksen energialaskennan testivuosia 2020. Kompressorien tuottaman lämmön hyödyntämistä tarkasteltiin kiinteistölämmityksen lämmönsäätökäyrästöjen avulla, joilla pystyi muodostamaan trendikäyrän laskelmia varten.
Laskennan tuloksien perusteella voidaan todeta, että nykyisen ilmanvaihdon saneeraus lämmöntalteenoton osalta on kannattavaa, joskin takaisinmaksuajat ovat korkeat. Takaisinmaksuaikoja voidaan pienentää hyödyntämällä energiatukia, jotka voi kattaa investoinneista 20 % tapauksesta riippuen. Lisäksi muiden tarjouspyyntöjen tekeminen voi olla kannattavaa. Kompressorien tuottaman lämmön käyttö on myös mahdollista ja sitä tulisi tutkia lisää. In this thesis the improvement of the energy efficiency of ventilation in Koskisen Oy’s coating plant was inspected by making use of the exhaust air heat in the preheating of supply air. There are needle heat exchangers installed on the inlet and outlet sides of the ventilation but because of dirty exhaust air, the exhaust heat exchangers are not working as expected. In addition, the utilization of compressor generated heat was inspected in the coating plant heating network.
The available data on the temperature and relative humidity of the coating plant were utilized along with the air flow data inspected by external consulting company. The test years of the Finnish Meteorological Institute’s energy calculation for 2020 were used to estimate the outdoor temperature and relative humidity. The utilization of compressor generated heat was examined by using temperature control curves of the buildings heating network, which could be used to form a trend curve for the calculations.
According to the calculation results, the renovation of the current heat exchangers is profitable, although the payback times are quite high. The payback times can be reduced by utilizing the energy subsidies, which can cover around 20 % of the investment, depending on the case. In addition, new offers should be inspected. The use of compressor generated heat is also possible and should be inspected more.
Ilmanvaihdon laskelmia varten hyödynnettiin saatavilla olevia pinnoitustehtaan lämpötila- ja suhteellisen kosteuden tietoja sekä ulkoisen konsultointiyrityksen tietoja ilmanvaihdon virtauksesta. Ulkolämpötilan ja kosteuden arviointiin käytettiin Ilmatieteenlaitoksen energialaskennan testivuosia 2020. Kompressorien tuottaman lämmön hyödyntämistä tarkasteltiin kiinteistölämmityksen lämmönsäätökäyrästöjen avulla, joilla pystyi muodostamaan trendikäyrän laskelmia varten.
Laskennan tuloksien perusteella voidaan todeta, että nykyisen ilmanvaihdon saneeraus lämmöntalteenoton osalta on kannattavaa, joskin takaisinmaksuajat ovat korkeat. Takaisinmaksuaikoja voidaan pienentää hyödyntämällä energiatukia, jotka voi kattaa investoinneista 20 % tapauksesta riippuen. Lisäksi muiden tarjouspyyntöjen tekeminen voi olla kannattavaa. Kompressorien tuottaman lämmön käyttö on myös mahdollista ja sitä tulisi tutkia lisää.
The available data on the temperature and relative humidity of the coating plant were utilized along with the air flow data inspected by external consulting company. The test years of the Finnish Meteorological Institute’s energy calculation for 2020 were used to estimate the outdoor temperature and relative humidity. The utilization of compressor generated heat was examined by using temperature control curves of the buildings heating network, which could be used to form a trend curve for the calculations.
According to the calculation results, the renovation of the current heat exchangers is profitable, although the payback times are quite high. The payback times can be reduced by utilizing the energy subsidies, which can cover around 20 % of the investment, depending on the case. In addition, new offers should be inspected. The use of compressor generated heat is also possible and should be inspected more.