Characterisation of RF connectors and components for advanced 5G applications
Rasilainen, Kimmo; Leinonen, Marko E.; Kursu, Olli; Nevala, Klaus; Naushahi, Shayan Hasan; Ojakoski, Juha-Matti; Berg, Markus; Pärssinen, Aarno (2022-07-12)
K. Rasilainen et al., "Characterisation of RF Connectors and Components for Advanced 5G Applications," 2022 IEEE 72nd Electronic Components and Technology Conference (ECTC), 2022, pp. 942-948, doi: 10.1109/ECTC51906.2022.00153.
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
https://urn.fi/URN:NBN:fi-fe2022083056775
Tiivistelmä
Abstract
Development of 5G and beyond technologies brings wireless communications systems to operate at higher frequencies and makes them more compact and integrated in nature. This places further challenges for component and system design, but at the same time the need for reliable RF interconnections becomes more and more important. This work investigates passive RF structures implemented on a low-permittivity Panasonic dielectric substrate up to a frequency of 110 GHz with simulations and measurements. Two different test cases are considered: a simple transmission line with a TRL calibration structure as well as a Wilkinson power divider. Agreement between simulations and measurements is rather good, and the results show that the used substrate material is a viable alternative for RF applications around 100 GHz.
Kokoelmat
- Avoin saatavuus [31657]