Non-contact characterization of flexible hybrid electronics by synchronized thermography
Remes, Kari; Fabritius, Tapio (2019-12-26)
K. Remes and T. Fabritius, "Non-Contact Characterization of Flexible Hybrid Electronics by Synchronized Thermography," in IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 5, pp. 2390-2397, May 2020, doi: 10.1109/TIM.2019.2962576
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
https://urn.fi/URN:NBN:fi-fe202002195809
Tiivistelmä
Abstract
Eddy current heating with synchronized thermography (ST) is utilized for the contactless characterization of flexible hybrid electronics. A proposed approach is used for analyzing the uniformity of large area electronics being the basis for the quality assurance of hybrid electronics manufacturing. Flexible polymer substrate with printed conductors, bonded conventionally manufactured light-emitting diode (LED) chips and current regulators were used as test samples. Obtained results show that ST with eddy current heating is an effective and roll-to-roll compatible measurement tool for in-situ quality monitoring of hybrid electronics manufacturing.
Kokoelmat
- Avoin saatavuus [31993]