Noise considerations in pulse-shaping based TIA channel designed for a pulsed TOF laser radar receiver
Baharmast, Aram; Kostamovaara, Juha (2018-12-13)
A. Baharmast and J. Kostamovaara, "Noise Considerations in Pulse-Shaping Based TIA Channel Designed for a Pulsed TOF Laser Radar Receiver," 2018 IEEE Nordic Circuits and Systems Conference (NORCAS): NORCHIP and International Symposium of System-on-Chip (SoC), Tallinn, Estonia, 2018, pp. 1-6. doi: 10.1109/NORCHIP.2018.8573466
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
https://urn.fi/URN:NBN:fi-fe201901071478
Tiivistelmä
Abstract
In this study a detailed noise analysis and measurements of a time-of-flight (TOF) laser radar front-end amplifier are presented, in which an LC pulse shaper is combined with the non-linear feedback Trans-Impedance Amplifier in order to achieve a low noise and wide dynamic range TOF receiver. The noise of the receiver limits the single shot precision and sensitivity (i.e., the dynamic range at low end) of the receiver channel. It is shown that the proposed technique shapes the noise generated by various components of the front-end. Furthermore, in order to achieve the best possible noise performance, various compromises over different characteristics of the front-end (walk error, bandwidth) are discussed. The proposed front-end amplifier was fabricated as a part of a TOF receiver chip in a 0.35μm standard CMOS process and our measurements show a trans-impedance gain of ∼122dBΩ, a bandwidth of ∼200 MHz, and an input-referred equivalent current noise of ∼60 nA.
Kokoelmat
- Avoin saatavuus [31941]