Pakoputkien hitsauslaadun varmistus ja parantaminen
Valtonen, Petra-Johanna (2021)
Valtonen, Petra-Johanna
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2021062416650
https://urn.fi/URN:NBN:fi:amk-2021062416650
Tiivistelmä
Opinnäytetyön tilaajana toimi Stera Technologies Oy:n Turun toimipiste. Opinnäytetyön tavoitteena oli luoda testaussuunnitelma pakoputkien hitsauslaadun parantamiseksi ja samalla tutustua tuotteen prosessikontrollien analysointiin.
Työssä käytettiin teoriapohjaa suunnitelman tekemiseen ja arvioitiin eri arvojen säätämisen merkitystä tuotteen laadulle prosessissa. Lähtötilatutkimuksessa selvitettiin prosessin tila, jonka pohjalta yhdessä teorian kanssa suunnitelmaa voitiin tarkentaa. Tarkennusten tuloksena oli suunnitelma jota voidaan hyödyntää hitsauslaadun kehittämiseen. Suunnitelma koostui useasta eri vaiheesta usean eri säädettävän arvon vuoksi. This work was ordered by the Turku branch of Stera Technologies Oy. The goal of this thesis was to create a testing plan for improving weld quality in exhaust pipes while getting to know the analysis of process control results. The theory base was used to create the test plan and to evaluate the effect of each tested value in the process.
In the baseline study the state of the current process was reviewed, which in tandem with the theory base helped to narrow down the possible issues in the current process. The result of these conclusions was a plan that can be used to develop the quality of the welding. The plan consisted of several steps due to the number of values that needed to be tested.
Työssä käytettiin teoriapohjaa suunnitelman tekemiseen ja arvioitiin eri arvojen säätämisen merkitystä tuotteen laadulle prosessissa. Lähtötilatutkimuksessa selvitettiin prosessin tila, jonka pohjalta yhdessä teorian kanssa suunnitelmaa voitiin tarkentaa. Tarkennusten tuloksena oli suunnitelma jota voidaan hyödyntää hitsauslaadun kehittämiseen. Suunnitelma koostui useasta eri vaiheesta usean eri säädettävän arvon vuoksi.
In the baseline study the state of the current process was reviewed, which in tandem with the theory base helped to narrow down the possible issues in the current process. The result of these conclusions was a plan that can be used to develop the quality of the welding. The plan consisted of several steps due to the number of values that needed to be tested.