Teräsrakenteisten tukiseinien mitoitus
Tuisku, Benjamin (2020)
Tuisku, Benjamin
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020061919154
https://urn.fi/URN:NBN:fi:amk-2020061919154
Tiivistelmä
Insinöörityön tarkoituksena oli tutkia teräsrakenteisten tukiseinien mitoitusprosessia. Työssä käsitellään maaperän ja tukiseinän yhteistoimintaa sekä tämän mallintamista Geocalclaskentaohjelmalla. Laskennasta saadut voimasuureet käsitellään Eurokoodien mukaisesti ja näiden pohjalta tehdään esimerkkilaskelma, jossa mitoitetaan tukiseinän teräsrakenteet.
Tukiseinätyyppejä on erilaisia kuten teräsponttiseiniä, porapaaluseiniä ja settiseiniä. Tässä työssä keskitytään pelkästään teräsponttiseiniin. Menetelmänä on kirjallisuustutkimus, jossa tärkeimpinä lähteinä ovat RILin oppaat, mutta työssä hyödynnetään myös geotekniikan oppikirjoja ja laskentaohjelman teoriaohjeita. Lisäksi laskentaohjelmalla tehdään laskelmia käytännössä ja käydään läpi vaihe vaiheelta lähtöarvojen syöttäminen ohjelmaan.
Työn tuloksena syntyi kokonaisuus, josta selkenee mitoitusprosessin kulku käytännössä.
Työ on suunnattu suunnittelijoille, joilla on jo ennestään jonkinlainen tietämys geotekniikan perusteista ja toisaalta rakenteiden mitoituksesta. The purpose of this thesis work was to study the designing process of steel-structured retaining walls. The aim was also to become familiar with the co-operation of the soil and the steel retaining wall. The Geocalc calculation program was used for modeling. The forces which were obtained from the calculation program were then processed according to the Eurocodes and on the basis of these an example calculation was made, in which the steel structures of the retaining wall were dimensioned.
There are different types of retaining steel walls such as sheet piles, drill piles and soldier pile walls. This work is focused only on steel sheet pile walls.
The method of study was to research written literature sources, and as the most important sources are RIL guides, but also the basics of geotechnology and the theoretical instructions of the calculation program. Also, the calculation program was used to make calculations in practice and enter different input values into the program step by step.
As a result of the work a collection of instructions was created where the process of calculation and dimensioning of steel sheet piles was addressed.
The work may be useful for designers who already have information of the basics of geotechnology and also of designing of steel structures.
Tukiseinätyyppejä on erilaisia kuten teräsponttiseiniä, porapaaluseiniä ja settiseiniä. Tässä työssä keskitytään pelkästään teräsponttiseiniin. Menetelmänä on kirjallisuustutkimus, jossa tärkeimpinä lähteinä ovat RILin oppaat, mutta työssä hyödynnetään myös geotekniikan oppikirjoja ja laskentaohjelman teoriaohjeita. Lisäksi laskentaohjelmalla tehdään laskelmia käytännössä ja käydään läpi vaihe vaiheelta lähtöarvojen syöttäminen ohjelmaan.
Työn tuloksena syntyi kokonaisuus, josta selkenee mitoitusprosessin kulku käytännössä.
Työ on suunnattu suunnittelijoille, joilla on jo ennestään jonkinlainen tietämys geotekniikan perusteista ja toisaalta rakenteiden mitoituksesta.
There are different types of retaining steel walls such as sheet piles, drill piles and soldier pile walls. This work is focused only on steel sheet pile walls.
The method of study was to research written literature sources, and as the most important sources are RIL guides, but also the basics of geotechnology and the theoretical instructions of the calculation program. Also, the calculation program was used to make calculations in practice and enter different input values into the program step by step.
As a result of the work a collection of instructions was created where the process of calculation and dimensioning of steel sheet piles was addressed.
The work may be useful for designers who already have information of the basics of geotechnology and also of designing of steel structures.