Teollisuusverkon sähkön laadun selvitys
Kujala, Joni (2020)
Kujala, Joni
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020052513364
https://urn.fi/URN:NBN:fi:amk-2020052513364
Tiivistelmä
Opinnäytetyöni tarkoituksena oli tutkia kurikkalaisen metalliteollisuusyrityksen Relicomp Oy:n teollisuusverkon sähkön laatuongelmia. Alustavissa mittauksissa vuonna 2018 oli havaittu yliaaltoja sekä korkeita virran hetkellisarvoja. Tämän työn tarkoituksena oli tehdä sähkön laatumittaukset kahdessa ongelmallisessa jakokeskuksessa ja selvittää ongelmia aiheuttavat sähkön laadun suureet, jolloin ongelmat voitaisiin ratkaista.
Työssä tehdyt mittaukset suoritettiin Metrel MI-2592 PowerQ4-energia-analysaattorin avulla. Mittarin avulla voitiin suorittaa standardin SFS-EN-50160 mukaiset sähkön laatumittaukset. Mittausten tuloksia saatettiin tarkastella Metrel PowerView-ohjelmalla sekä Excel-taulukkolaskentaohjelmalla ja tällöin verrata mittausten tuloksia standardin SFS-EN-50160 määrittämiin raja-arvoihin.
Työtä varten suoritettujen mittausten tulokset vastasivat aikaisempien mittausten tuloksia. Mittausten perusteella ongelmallisiksi osoittautuivat virran yliaaltopitoisuus sekä puutteellisesti toimiva loistehon kompensointi. The purpose of this thesis was to study the power quality of industrial network at Relicomp Oy, a metal industry company located in the town of Kurikka. During the preliminary measurements in 2018, high current levels and current harmonics were detected. The purpose of this thesis was to conduct power quality measurements at the same two problematic locations, to identify the problem and to find a way to solve it.
The measurements were made using the Metrel MI-2592 PowerQ4 energy analyzer. The meter was used to perform power quality measurements in accordance with standard SFS-EN-50160. The results of these measurements could then be viewed and analyzed with the Metrel PowerView software and the Excel spreadsheet software. The measurement results were then compared with the limit values specified by the standard SFS-EN-50160.
The results of the measurements corresponded to the results of the previous measurements. According to the measurement data, high levels of current harmonics and poor reactive power compensation proved to be the two most problematic factors.
Työssä tehdyt mittaukset suoritettiin Metrel MI-2592 PowerQ4-energia-analysaattorin avulla. Mittarin avulla voitiin suorittaa standardin SFS-EN-50160 mukaiset sähkön laatumittaukset. Mittausten tuloksia saatettiin tarkastella Metrel PowerView-ohjelmalla sekä Excel-taulukkolaskentaohjelmalla ja tällöin verrata mittausten tuloksia standardin SFS-EN-50160 määrittämiin raja-arvoihin.
Työtä varten suoritettujen mittausten tulokset vastasivat aikaisempien mittausten tuloksia. Mittausten perusteella ongelmallisiksi osoittautuivat virran yliaaltopitoisuus sekä puutteellisesti toimiva loistehon kompensointi.
The measurements were made using the Metrel MI-2592 PowerQ4 energy analyzer. The meter was used to perform power quality measurements in accordance with standard SFS-EN-50160. The results of these measurements could then be viewed and analyzed with the Metrel PowerView software and the Excel spreadsheet software. The measurement results were then compared with the limit values specified by the standard SFS-EN-50160.
The results of the measurements corresponded to the results of the previous measurements. According to the measurement data, high levels of current harmonics and poor reactive power compensation proved to be the two most problematic factors.