Peruskorjatun kiinteistön sähkösuunnittelu KNX-DALI-valaistuksenohjauksella
Sironen, Janne (2020)
Sironen, Janne
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202004255899
https://urn.fi/URN:NBN:fi:amk-202004255899
Tiivistelmä
Tämän opinnäytetyön tavoitteena oli tehdä sähkösuunnitelmat kiinteistöön, jossa suoritetaan peruskorjaus. Kiinteistössä sijaitsee toimisto- ja neuvottelutiloja, joihin haettiin muuntojoustavuutta. Kiinteistön valaistuksenohjaukseen käytettiin DALI-valaisimia sekä KNX-järjestelmää. Opinnäytetyön aihe valikoitui omasta kiinnostuksesta valaistuksenohjaukseen, ja tähän sopiva projekti oli suunnitteilla. Opinnäytetyö tehtiin Granlund Pohjanmaa Oy:lle.
Opinnäytetyön tekeminen aloitettiin tutustumalla julkaisuihin toimistojen valaistuksesta sekä DALI-järjestelmän perusteista. Opinnäytetyössä tutkittiin myös DALI2-standardia ja ihmiskeskeistä valaistusta. Tämän jälkeen käytiin KNX-järjestelmän rakennetta, tiedonsiirtoa, suunnittelun eri vaiheita sekä dokumentteja läpi. Lopuksi esitellään KNX-järjestelmän ohjelmointiin ja käyttöönottoon käytettävää ETS-sovellusta. Suunnitelmat tehtiin MagiCAD 2019 -sovelluksella.
Opinnäytetyön tuloksena kohteeseen saatiin suunniteltua tasopiirustukset, keskuskaaviot sekä järjestelmäkaavio, joiden avulla urakoitsija pystyy toteuttamaan asennukset. Kiinteistön tiloihin saavutettiin hyvä muuntojoustavuus väyläpohjaisella valaistuksenohjausjärjestelmällä ja langattomilla tuotteilla. Laaja teoriapohja antoi hyvän lähtökohdan suunnittelulle sekä tuleville projekteille. The purpose of the thesis was to make electrical plans for a renovated property. The property has an office and conference facilities. The objective was to achieve a good conversion flexibility in the facilities. The lighting control system was the DALI - digital addressable lighting interface and the KNX system. The topic of the thesis was selected due to my own interest in lighting control system. The thesis was done for Granlund Pohjanmaa Oy.
The thesis was started by studying the relevant publications on office lighting and the basics of DALI. In addition, the research of the subject was DALI2-standard and human centric lighting. The next phase was to get familiar with the KNX- system and programming in ETS. The electrical drawings were done with MagiCAD 2019.
The results of this thesis were electrical plans including floor plans, switchboard schematics and system diagram. With the help of a bus-based lighting control system and wireless products, good conversion flexibility was achieved for the property. The electrical plans allow the contractor to complete the installations. The broad theoretical basis provided a good starting point for planning as well as upcoming projects.
Opinnäytetyön tekeminen aloitettiin tutustumalla julkaisuihin toimistojen valaistuksesta sekä DALI-järjestelmän perusteista. Opinnäytetyössä tutkittiin myös DALI2-standardia ja ihmiskeskeistä valaistusta. Tämän jälkeen käytiin KNX-järjestelmän rakennetta, tiedonsiirtoa, suunnittelun eri vaiheita sekä dokumentteja läpi. Lopuksi esitellään KNX-järjestelmän ohjelmointiin ja käyttöönottoon käytettävää ETS-sovellusta. Suunnitelmat tehtiin MagiCAD 2019 -sovelluksella.
Opinnäytetyön tuloksena kohteeseen saatiin suunniteltua tasopiirustukset, keskuskaaviot sekä järjestelmäkaavio, joiden avulla urakoitsija pystyy toteuttamaan asennukset. Kiinteistön tiloihin saavutettiin hyvä muuntojoustavuus väyläpohjaisella valaistuksenohjausjärjestelmällä ja langattomilla tuotteilla. Laaja teoriapohja antoi hyvän lähtökohdan suunnittelulle sekä tuleville projekteille.
The thesis was started by studying the relevant publications on office lighting and the basics of DALI. In addition, the research of the subject was DALI2-standard and human centric lighting. The next phase was to get familiar with the KNX- system and programming in ETS. The electrical drawings were done with MagiCAD 2019.
The results of this thesis were electrical plans including floor plans, switchboard schematics and system diagram. With the help of a bus-based lighting control system and wireless products, good conversion flexibility was achieved for the property. The electrical plans allow the contractor to complete the installations. The broad theoretical basis provided a good starting point for planning as well as upcoming projects.