Induktiouunin modernisointi
Seimelä, Jani (2019)
Seimelä, Jani
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019120525057
https://urn.fi/URN:NBN:fi:amk-2019120525057
Tiivistelmä
Opinnäytetyön tarkoituksena oli suunnitella modernisaatio induktiokouru-uunille. Työn kohteena oli Oras Groupin Rauman yksikössä sijaitseva induktiokouru-uuni, jonka modernisaatio mahdollisuutta Oras Group oli tiedustellut Quantilta. Selvityksen jälkeen päädyttiin testaamaan, että voidaanko uunin lämmitystä ohjata taajuusmuuttajien avulla.
Opinnäytetyön teoriaosuus käsittelee induktiouunien, taajuusmuuttajien sekä sinisuotimien toimintaa. Induktiouuni-osiossa esitetään kahden yleisemmän induktiouunityypin rakennetta ja toimintaa. Taajuusmuuttajien ja sinisuotimien toimintaperiaatteet kuvataan omissa kappaleissaan.
Teoriaosion jälkeen esitetään modernisaation suunnittelusta ja testausvaiheesta kerättyä tietoa. Testauksessa käytetiin kolmea eri taajuusmuuttajaa, jotka kaikki oli Vaconin valmistamia. Aluksi testaus suoritettiin tyhjällä Inducan valmistamalla uunilla ja lopuksi tuotantoseisakissa olevalla täydellä uunilla. Testitulokset kirjattiin muistiin samoin kuin lopulliset taajuusmuuttajan parametritkin taajuusmuuttajasta. Saatujen tulosten perusteella päätettiin jatkaa suunnittelua niin, että lopullinen testilaitteisto voitaisiin koekäyttää ja antaa tarjous modernisaatiosta Oras Groupille. The purpose of this thesis was to design modernization for channel induction furnace. The subject of the work was a channel induction furnace found in Oras Group Rauma site, which modernization options Oras Group had inquired from Quant. After the study, it was decided to test out if the heating of the furnace can be controlled by frequency converters.
The theoretical part of the thesis deals with the operating principles of induction furnace, frequency converters and sine wave filters. The Induction furnace section provides information about the structure and function of the two most common types of induction furnaces. The operating principles of the inverters and sine wave filters are described in their own chapters.
After the theory section, will be shown the information which were collected on the design and testing phase of the modernization. Three different frequency converters, all manufactured by Vacon, were used for testing. Initially, the test was carried out with an empty furnace manufactured by Induca and finally with a full furnace. The test results were recorded as well as the final drive parameters of the frequency converter. Based on the results obtained, it is possible to continue the design so that the final concept can be tested and give an offer to the Oras Group for the modernization.
Opinnäytetyön teoriaosuus käsittelee induktiouunien, taajuusmuuttajien sekä sinisuotimien toimintaa. Induktiouuni-osiossa esitetään kahden yleisemmän induktiouunityypin rakennetta ja toimintaa. Taajuusmuuttajien ja sinisuotimien toimintaperiaatteet kuvataan omissa kappaleissaan.
Teoriaosion jälkeen esitetään modernisaation suunnittelusta ja testausvaiheesta kerättyä tietoa. Testauksessa käytetiin kolmea eri taajuusmuuttajaa, jotka kaikki oli Vaconin valmistamia. Aluksi testaus suoritettiin tyhjällä Inducan valmistamalla uunilla ja lopuksi tuotantoseisakissa olevalla täydellä uunilla. Testitulokset kirjattiin muistiin samoin kuin lopulliset taajuusmuuttajan parametritkin taajuusmuuttajasta. Saatujen tulosten perusteella päätettiin jatkaa suunnittelua niin, että lopullinen testilaitteisto voitaisiin koekäyttää ja antaa tarjous modernisaatiosta Oras Groupille.
The theoretical part of the thesis deals with the operating principles of induction furnace, frequency converters and sine wave filters. The Induction furnace section provides information about the structure and function of the two most common types of induction furnaces. The operating principles of the inverters and sine wave filters are described in their own chapters.
After the theory section, will be shown the information which were collected on the design and testing phase of the modernization. Three different frequency converters, all manufactured by Vacon, were used for testing. Initially, the test was carried out with an empty furnace manufactured by Induca and finally with a full furnace. The test results were recorded as well as the final drive parameters of the frequency converter. Based on the results obtained, it is possible to continue the design so that the final concept can be tested and give an offer to the Oras Group for the modernization.