Prässätyn kokokeraamisen kruunun valmistus : opetusvideo
Järvelin, Joonas; Lehti, Sami; Lindholm, Isa (2019)
Järvelin, Joonas
Lehti, Sami
Lindholm, Isa
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019091318466
https://urn.fi/URN:NBN:fi:amk-2019091318466
Tiivistelmä
Opinnäytetyön aiheena on prässätyn kokokeraamisen kruunun valmistus. Tavoitteena oli tuottaa ohjemateriaalia videon muodossa Turun ammattikorkeakoulun hammasteknikkoopiskelijoiden käyttöön. Työ tehtiin toiminnallisena opinnäytetyönä ja se muodostuu kahdesta osasta: raportista ja videosta.
Kiinteä protetiikka on olennainen osa hammasteknikon työtä. Kokokeraamiset materiaalit ovat kehittyneet 2000luvulla nopeasti ja ovat nykypäivänä hyvin yleisiä. Myös perinteistä prässimenetelmää käytetään yhä yleisesti, joten aihe on opiskelijalle tärkeä. Videon tarkoituksena oli tuottaa aiheesta yleispätevä suomenkielinen ohje opiskelijoiden käyttöön.
Raportissa kerrotaan yleisesti protetiikasta ja työssä käytettävistä materiaaleista. Lisäksi käsitellään sitä, minkälainen on hyvä opetusvideo ja mitä ominaisuuksia siltä vaaditaan, sekä videon mahdollisuuksista opetuksessa. Lopuksi käydään läpi työn toteutus, sekä pohditaan siinä onnistumisia ja haasteita. The subject of this thesis is the manufacturing of an all¬ceramic crown using press technique. The purpose of the thesis was to produce an instructional video for the use of dental technology students at the Turku University of Applied Sciences. It was carried out as a practice based thesis and it consists of two parts: a written report and an instructional video.
Fixed prosthodontics are an essential part of dental technicians work. All¬ceramic materials have developed very rapidly during the 21st century and are now very widespread. The traditional press manufacturing technique is still commonly used so the subject is important for a student. The purpose of the video was to produce general instructions in Finnish for students.
The report describes prosthodontics and the used materials in general. It also describes the qualities of a good instructional video, the features that are required and its possibilities in education. Lastly the execution of the process is described and the successes and the challenges of the process are reflected.
Kiinteä protetiikka on olennainen osa hammasteknikon työtä. Kokokeraamiset materiaalit ovat kehittyneet 2000luvulla nopeasti ja ovat nykypäivänä hyvin yleisiä. Myös perinteistä prässimenetelmää käytetään yhä yleisesti, joten aihe on opiskelijalle tärkeä. Videon tarkoituksena oli tuottaa aiheesta yleispätevä suomenkielinen ohje opiskelijoiden käyttöön.
Raportissa kerrotaan yleisesti protetiikasta ja työssä käytettävistä materiaaleista. Lisäksi käsitellään sitä, minkälainen on hyvä opetusvideo ja mitä ominaisuuksia siltä vaaditaan, sekä videon mahdollisuuksista opetuksessa. Lopuksi käydään läpi työn toteutus, sekä pohditaan siinä onnistumisia ja haasteita.
Fixed prosthodontics are an essential part of dental technicians work. All¬ceramic materials have developed very rapidly during the 21st century and are now very widespread. The traditional press manufacturing technique is still commonly used so the subject is important for a student. The purpose of the video was to produce general instructions in Finnish for students.
The report describes prosthodontics and the used materials in general. It also describes the qualities of a good instructional video, the features that are required and its possibilities in education. Lastly the execution of the process is described and the successes and the challenges of the process are reflected.