Creating introduction material for pre-fabrication
Mäki, Joonas (2019)
Mäki, Joonas
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019062617541
https://urn.fi/URN:NBN:fi:amk-2019062617541
Tiivistelmä
The objective of this thesis is to describe a new pre-treatment process and operation of related equipment and control systems. The aim of the research was to create a clear process description for a company’s new pre-treatment line. The company will utilize the results of the research in the introduction of a new production line. In addition to that, the second aim was to prepare documentation of the daily maintenance activities in the form of all maintenance activities and to provide a clear listing of all maintenance required on the production line for the line operator.
The thesis consists of three parts. Firstly, a clear process description was created for the new production line according to the company’s wishes. Secondly, a list of maintenance requirements was written for maintenance planning. Thirdly, work instructions were created for production line operators.
The thesis consists of a theory and practical parts. The theory section consists of the ship hull construction process, the metal pre-treatment process and the orientation process. In the practical part, there is also some theory about process description, maintenance planning and work instructions. The practical part was based on the materials sent by the supplier and on the author’s observations. The information collected on the pre-treatment process due to the delimitation and purpose of the topic was general and did not go into more detailed technical information.
The result of the thesis was an updated maintenance plan, process description and orientation material for the new pre-treatment line, which company can use in orientation and in the development of working methods. Tässä opinnäytetyössä kuvataan uuden esikäsittelylinjan prosessia ja siihen liittyen laitteiden ja ohjausjärjestelmien toimintaa. Tutkimuksen tavoitteena oli luoda käyttöönoton tueksi selkeä prosessikuvaus linjan toiminnasta toimeksiantajalle, joka voisi hyödyntää tutkimuksen tulosta tuotantolinjan käyttöönotossa. Tämän lisäksi toisena tavoitteena oli laatia päivittäisistä tuotannon ylläpitävistä toimista työnohjeen muodossa dokumentaatio ja huoltojen suunnittelun tueksi oli tarkoitus luoda selkeä listaus kaikista tuotantolinjalla vaadittavista huoltotoimista linjan operaattorille.
Opinnäytetyö jäsenneltiin kolmeen osaan siten, että ensimmäisessä osiossa luotiin selkeä prosessikuvaus tuotantolinjasta toimeksiantajan toiveiden mukaan. Toisessa osassa kirjoitettiin huoltolistaus huoltojen suunnittelun tueksi ja kolmannessa vaiheessa luotiin työohjeita eri työtehtävistä.
Opinnäytetyö kostuu tietopohjasta ja käytännön osasta. Teoria osuuksissa käydään läpi laivan rungon rakennus prosessia, metallin esikäsittely prosessia sekä perehdytys prosessia. Työn käytännön osissa käydään myös hieman teoriaa prosessin kuvaamisesta, huoltojen suunnittelusta ja työohjeiden rakentamisesta. Käytännön työ rakennettiin tuotantolinjan toimittajan lähettämien materiaalien sekä omien havaintojen perusteella. Aiheen rajauksen ja käyttötarkoituksen vuoksi kerätyt tiedot esikäsittelyprosessista kuvattiin yleisellä tasolla eikä aiheessa menty syvällisempiin teknisiin tietoihin.
Opinnäytetyön lopputuloksena päästiin tavoitteeseen ja luotiin päivitetty huoltosuunnitelma, prosessikuvaus sekä perehdytyskansio uudelle esikäsittelylinjalle, jota toimeksiantaja pystyy käyttämään perehdytyksessä sekä työmenetelmien kehityksessä.
The thesis consists of three parts. Firstly, a clear process description was created for the new production line according to the company’s wishes. Secondly, a list of maintenance requirements was written for maintenance planning. Thirdly, work instructions were created for production line operators.
The thesis consists of a theory and practical parts. The theory section consists of the ship hull construction process, the metal pre-treatment process and the orientation process. In the practical part, there is also some theory about process description, maintenance planning and work instructions. The practical part was based on the materials sent by the supplier and on the author’s observations. The information collected on the pre-treatment process due to the delimitation and purpose of the topic was general and did not go into more detailed technical information.
The result of the thesis was an updated maintenance plan, process description and orientation material for the new pre-treatment line, which company can use in orientation and in the development of working methods.
Opinnäytetyö jäsenneltiin kolmeen osaan siten, että ensimmäisessä osiossa luotiin selkeä prosessikuvaus tuotantolinjasta toimeksiantajan toiveiden mukaan. Toisessa osassa kirjoitettiin huoltolistaus huoltojen suunnittelun tueksi ja kolmannessa vaiheessa luotiin työohjeita eri työtehtävistä.
Opinnäytetyö kostuu tietopohjasta ja käytännön osasta. Teoria osuuksissa käydään läpi laivan rungon rakennus prosessia, metallin esikäsittely prosessia sekä perehdytys prosessia. Työn käytännön osissa käydään myös hieman teoriaa prosessin kuvaamisesta, huoltojen suunnittelusta ja työohjeiden rakentamisesta. Käytännön työ rakennettiin tuotantolinjan toimittajan lähettämien materiaalien sekä omien havaintojen perusteella. Aiheen rajauksen ja käyttötarkoituksen vuoksi kerätyt tiedot esikäsittelyprosessista kuvattiin yleisellä tasolla eikä aiheessa menty syvällisempiin teknisiin tietoihin.
Opinnäytetyön lopputuloksena päästiin tavoitteeseen ja luotiin päivitetty huoltosuunnitelma, prosessikuvaus sekä perehdytyskansio uudelle esikäsittelylinjalle, jota toimeksiantaja pystyy käyttämään perehdytyksessä sekä työmenetelmien kehityksessä.