Avoprofiilisen ristikon solmupistetarkastelu
Nissilä, William (2019)
Nissilä, William
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019052010585
https://urn.fi/URN:NBN:fi:amk-2019052010585
Tiivistelmä
Opinnäytetyön aiheena oli tarkastella rakenneputkisien uumasauvojen ja I- tai H-profiilisien paarteiden välisiä hitsausliitoksia. Työssä selvitettiin putkiprofiilien ja avoimien profiilien yhdistelmistä koostuvien tasoristikoiden liitosten mitoitusperiaatteet.
Opinnäytetyön teoriaosuudessa esitetään liitostyypit, murtumismuodot ja kestävyyksien laskentakaavat. Liitoksen käyttäytymisen ja murtumismuotojen kuvaamista varten työssä käytettiin CIDECT-yhdistyksen julkaisemia suunnitteluohjeita, joiden suosituksiin eurokoodin standardissa SFS-EN 1993-1-8 esitetyt mitoitusehdot ristikkoliitoksille perustuvat.
Työn lopussa esitetään esimerkkimitoitus ristikon K-liitokselle, joka toteutettiin SFS-EN 1993-1-8standardin mukaisesti. I-profiilisesta paarresauvasta ja rakenneputkisista uumasauvoista koostuvan esimerkkiristikon geometria ja kuormitustilanne määritettiin vastaamaan tavanomaista hallirakennuksen kattoristikkoa. Ristikosta valittiin tarkasteltavaksi yksi solmupiste ja laskettiin käyttöasteet eri murtumistapauksille.
Työn tuloksia hyödyntämällä voidaan mitoittaa I- tai H-profiilisella paarteella olevien tasoristikoiden liitoksia. Tämä insinöörityö käsittelee vain osien kestävyyttä liitoskohdassa. Sauvojen kokonaismitoitus sekä hitsien kestävyyksien tarkistaminen rajattiin työn ulkopuolelle. Työ on tehty A-Insinöörit Oy:n toimeksiannosta. The aim of this thesis was to study welded joints between structural hollow section brace members and I- or H-section chords. In this thesis the design principles of the lattice structure joints composed of combinations of hollow sections with open sections were determined.
In the theoretical part of this thesis joint types, failure modes and strength formulae are presented. To describe joint behavior and failure modes, the design guides published by the CIDECT association were used. The design criteria for truss joints presented in standard 1993-1-8 of the Eurocode are based on the recommendations of these design guides.
The thesis provides a design example of truss K-joint which was carried out in accordance with standard SFS-EN 1993-1-8. The geometry and loading condition of an example truss with I- or H-section as chord and bracings of hollow sections were determined to correspond to a usual roof truss of a hall building. One nodal point was selected for inspection from the truss and utilization rates for different failure modes were calculated.
By utilizing the results of the work, joints of lattice trusses with I or H profile as a chord can be dimensioned. This thesis only deals with the strength of the parts at the joint location. The overall design of the members and verification of the weld strengths were left out of the scope of the study. The work was commissioned by A-Insinöörit Oy.
Opinnäytetyön teoriaosuudessa esitetään liitostyypit, murtumismuodot ja kestävyyksien laskentakaavat. Liitoksen käyttäytymisen ja murtumismuotojen kuvaamista varten työssä käytettiin CIDECT-yhdistyksen julkaisemia suunnitteluohjeita, joiden suosituksiin eurokoodin standardissa SFS-EN 1993-1-8 esitetyt mitoitusehdot ristikkoliitoksille perustuvat.
Työn lopussa esitetään esimerkkimitoitus ristikon K-liitokselle, joka toteutettiin SFS-EN 1993-1-8standardin mukaisesti. I-profiilisesta paarresauvasta ja rakenneputkisista uumasauvoista koostuvan esimerkkiristikon geometria ja kuormitustilanne määritettiin vastaamaan tavanomaista hallirakennuksen kattoristikkoa. Ristikosta valittiin tarkasteltavaksi yksi solmupiste ja laskettiin käyttöasteet eri murtumistapauksille.
Työn tuloksia hyödyntämällä voidaan mitoittaa I- tai H-profiilisella paarteella olevien tasoristikoiden liitoksia. Tämä insinöörityö käsittelee vain osien kestävyyttä liitoskohdassa. Sauvojen kokonaismitoitus sekä hitsien kestävyyksien tarkistaminen rajattiin työn ulkopuolelle. Työ on tehty A-Insinöörit Oy:n toimeksiannosta.
In the theoretical part of this thesis joint types, failure modes and strength formulae are presented. To describe joint behavior and failure modes, the design guides published by the CIDECT association were used. The design criteria for truss joints presented in standard 1993-1-8 of the Eurocode are based on the recommendations of these design guides.
The thesis provides a design example of truss K-joint which was carried out in accordance with standard SFS-EN 1993-1-8. The geometry and loading condition of an example truss with I- or H-section as chord and bracings of hollow sections were determined to correspond to a usual roof truss of a hall building. One nodal point was selected for inspection from the truss and utilization rates for different failure modes were calculated.
By utilizing the results of the work, joints of lattice trusses with I or H profile as a chord can be dimensioned. This thesis only deals with the strength of the parts at the joint location. The overall design of the members and verification of the weld strengths were left out of the scope of the study. The work was commissioned by A-Insinöörit Oy.