Muuntamon lämpenemän mallinnus ja jäähdytyksen tehostaminen
Tuominen, Joonas (2019)
Tuominen, Joonas
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019051910560
https://urn.fi/URN:NBN:fi:amk-2019051910560
Tiivistelmä
Opinnäytetyö oli Utu Oy:n kesällä tekemiin mittauksista tehtyyn raporttiin perustuva tutkimus, jolla pyrittiin löytämään ratkaisuja muuntamon sisällä tapahtuvaan lämpenemiseen.
Opinnäytetyön tarkoituksena oli löytää ratkaisuja puistomuuntamon sisällä tapahtuvan lämpenemisen hallitsemiseksi ja kehittämiseksi Solidworks Flow Simulationia hyödyntäen, sekä samalla tutkittiin kannattaako kyseisen ohjelman lisenssi ostaa yritykselle.
Opinnäytetyössä perehdyttiin Solidworks Flow Simulation ohjelmistoon, jota käytettiin simulaatioiden tekemiseen. Sen avulla pyrittiin löytämään ratkaisuja lämpenemisen pienentämiseksi.
Simulaatioiden pohjalta laadittiin raportti, jossa ilmenivät eri simulaatioiden tulokset. Tulosten perustella pystyttiin tekemään päätelmiä, mitä muutoksia kannattaa tehdä muuntamoon. Lisäksi arvioitiin sitä, että kannattaako yritykseen hankkia ohjelman lisäosa ja saako sillä tehtyä tarvittavia simulaatioita. This thesis was a part of a study that was based on research done during the summer by Utu Oy. The thesis uses a report of that study to find solutions to combat a heat generation inside a transformer substation.
The purpose for this thesis was to find solutions to control heat generation inside the transformer substation and further develop solutions for it using the SolidWorks Flow Simulation tool and at the same time investigate if it is a viable option to acquire this simulation tool for the company.
In this thesis I studied the use of SolidWorks Flow Simulation which was used for making the simulations. With the simulation tool the aim was to find solutions to cope with the heat generation.
Based on the simulation results a report was compiled that showed the results of various simulations. Based on the results, I was able to draw conclusions on what changes should be made to the substation and whether the company should purchase the program license for themselves and would the program be of use for the needed simulations.
Opinnäytetyön tarkoituksena oli löytää ratkaisuja puistomuuntamon sisällä tapahtuvan lämpenemisen hallitsemiseksi ja kehittämiseksi Solidworks Flow Simulationia hyödyntäen, sekä samalla tutkittiin kannattaako kyseisen ohjelman lisenssi ostaa yritykselle.
Opinnäytetyössä perehdyttiin Solidworks Flow Simulation ohjelmistoon, jota käytettiin simulaatioiden tekemiseen. Sen avulla pyrittiin löytämään ratkaisuja lämpenemisen pienentämiseksi.
Simulaatioiden pohjalta laadittiin raportti, jossa ilmenivät eri simulaatioiden tulokset. Tulosten perustella pystyttiin tekemään päätelmiä, mitä muutoksia kannattaa tehdä muuntamoon. Lisäksi arvioitiin sitä, että kannattaako yritykseen hankkia ohjelman lisäosa ja saako sillä tehtyä tarvittavia simulaatioita.
The purpose for this thesis was to find solutions to control heat generation inside the transformer substation and further develop solutions for it using the SolidWorks Flow Simulation tool and at the same time investigate if it is a viable option to acquire this simulation tool for the company.
In this thesis I studied the use of SolidWorks Flow Simulation which was used for making the simulations. With the simulation tool the aim was to find solutions to cope with the heat generation.
Based on the simulation results a report was compiled that showed the results of various simulations. Based on the results, I was able to draw conclusions on what changes should be made to the substation and whether the company should purchase the program license for themselves and would the program be of use for the needed simulations.