Ovipanelihitsauksen automatisointi : Stera Technologies Oy
Grundström, Santeri (2019)
Grundström, Santeri
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201905037549
https://urn.fi/URN:NBN:fi:amk-201905037549
Tiivistelmä
Opinnäytetyö tehtiin Stera Technologies Oy:n Tammelan tehtaaseen. Työn tavoitteena oli suunnitella ja kuvata kehitysprojekti, jonka avulla hitsaustyövaiheen tuottavuutta, ergonomiaa, sekä laaduntuottokykyä saataisiin parannettua. Projektin tavoitteena oli tukea myös yrityksen strategiaa liittyen sisäisen moniosaamisen lisäämiseen ja jatkuvaan parantamiseen, sekä tuotannon kehittämiseen.
Työ aloitettiin kartoittamalla nykytilanne, sekä ongelmakohdat tuotannossa ja näiden havaintojen perusteella tarve investoinnille todettiin olevan erittäin tarpeellinen. Investoinnille luotiin myös budjetti ja kannattavuuslaskelmat, joiden avulla saatiin selvitettyä, että projektin toteuttaminen olisi myös taloudellisesti kannattavaa, koska tuottavuutta saataisiin parannettua merkittävästi investoinnin avulla.
Opinnäytetyössä kuvattiin myös projektin suunnittelua ja valmistusteknillisiä seikkoja, sekä kehitysprojektiin liittyviä riskitekijöitä. This thesis was made for Stera Technologies Oy, Tammela’s factory. The aim of the work was to design and describe a development project that would improve the productivy of the welding work phase, ergonomics and the ability to produce better quality. This project also supports company strategy for increasing internal expertise as well as continuous improvement and development of the production.
Project was started by mapping the situation and problem areas of current work phase. After mapping the project was found to be necessary to implement. Budged and profitability calculations were created for the investment so the project was also found to be economically viable to implement, because of better productivy of the work phase.
The thesis also described a design of the project as well as technical aspects and risk factors related to a development project.
Työ aloitettiin kartoittamalla nykytilanne, sekä ongelmakohdat tuotannossa ja näiden havaintojen perusteella tarve investoinnille todettiin olevan erittäin tarpeellinen. Investoinnille luotiin myös budjetti ja kannattavuuslaskelmat, joiden avulla saatiin selvitettyä, että projektin toteuttaminen olisi myös taloudellisesti kannattavaa, koska tuottavuutta saataisiin parannettua merkittävästi investoinnin avulla.
Opinnäytetyössä kuvattiin myös projektin suunnittelua ja valmistusteknillisiä seikkoja, sekä kehitysprojektiin liittyviä riskitekijöitä.
Project was started by mapping the situation and problem areas of current work phase. After mapping the project was found to be necessary to implement. Budged and profitability calculations were created for the investment so the project was also found to be economically viable to implement, because of better productivy of the work phase.
The thesis also described a design of the project as well as technical aspects and risk factors related to a development project.