Värmeregulator
Strand, Henrik (2013)
Strand, Henrik
Arcada - Nylands svenska yrkeshögskola
2013
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2013090615007
https://urn.fi/URN:NBN:fi:amk-2013090615007
Tiivistelmä
Syftet med detta examensarbete var att planera, bygga och testa en värmeregulator. Regulatorn kopplas till elvärmen i hus, såsom magasinerande golvvärme, varmvattenberedare och elradiatorer. Värmeregulatorns funktionsidé är att jämna ut strömtopparna vid koppling mellan dag och nattströmmen. Som grund till detta arbete användes tidigare arbeten gjorda inom samma område. I detta arbete var huvudpunkten att koppla ihop en styrkrets med ett slutsteg. Styrkretsens uppgift är att mäta den inkommande matnings-spänningen och genom att detektera nollgenomgångar synkronisera PWM-styrningen med matningsspänningen. Man har studerat teorin bakom IGBT-transistorer för att kunna framställa en fungerande lösning. Olika kopplingsmetoder för styrning av växelströmskopplingar undersöktes. Efter att man erhållit en tillräckligt god teoretisk kunskap för att utföra arbetet började man stegvis bygga upp den nya kretsen, en del mätningar och testande av olika lösningar gjordes under planeringen. Tekniken i värmeregulatorn bygger på en PIC-mikroprocessor. I arbetet kommer man fördjupa sig i teorin för mikro-processorn och dess egenskaper och funktioner. När man valt passlig mikroprocessor och bestämt funktionsprincipen byggdes resten av kretsen. Vid test av värmeregulatorn fäste man uppmärksamhet vid att den fungerade enligt specifikationerna. Alla mätningar ut-fördes i Arcadas elkraftslaboratorieutrymmen och man använde mätutrustning såsom oscilloskop, multimeter och effektmätare. The aim of this thesis was to design, build and test a heating regulator. The regulator will be connected to the electrical heating in households such as floor heating, warm water boilers and radiators. The working principle of the regulator is to smoothen current peaks between day and night electricity. As a basis for this thesis was earlier work done in the same field. In this thesis the main point was to connect a control circuit with a power cir-cuit. The control circuit is provided to measure the incoming supply voltage and by de-tecting the zero crossings synchronies the PWM control voltage to the supply voltage. Theory about IGBT-transistors will be studied to be able to produce a working solution and various connection methods for controlling AC power will be examined. After having obtained a sufficient theoretical knowledge the work began by gradually building the new circuit, some measurements and testing of various solutions were made in the planning. The technology in the heating controller is based on a PIC microcontroller and this work will immerse in the theory of the microprocessors and its features and functions. Having selected a suitable microprocessor the operation to build the rest of the circuit was done gradually. When testing the heating controller attention were drawn to that the regulator work according to the specifications. All measurements were performed in Arcada electric laboratory facilities and measuring equipment such as an oscilloscope,multimeter and a power meter were used.