Changes in mechanical properties of recycled polypropylene.
Weckström, Dan (2012)
Weckström, Dan
Arcada - Nylands svenska yrkeshögskola
2012
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201205046299
https://urn.fi/URN:NBN:fi:amk-201205046299
Tiivistelmä
The objective of the thesis was to find out how recycling affects the mechanical properties of polypropylene. The mechanical properties were tensile strength, Young`s modulus and melt flow index. The mechanical properties for the raw material of polypropylene were compared with the recycled ones. The same material was recycled 14th times in order to get a view of how the recycling affects the mechanical properties of polypropylene. The mechanical properties were tested with a testometric tensile testing machine and a melt flow index machine. The test specimen was a dog bone, for the testometric machine in order to find out the tensile strength and young`s modulus, and recycled granulates, for the melt flow index machine in order to find out the melt flow index. The material was recycled by using a plastic shredding machine and the dog bones were created with an injection molding machine. The thesis was done for personal use and interest. The recycling and testing part was done in the plastic laboratory located in Arcada - University of Applied Sciences. The school, Arcada in this case, provided the material used and the machines to perform the tests with. Syftet med detta slutarbete var att undersöka hur återvinning påverkar de mekaniska egenskaperna av polypropen. De mekaniska egenskaperna som undersöktes var draghållfasthet, Youngs modul och smält index. De mekaniska egenskaperna hos råmaterialet polypropen var jämförda med det återvunna materialets egenskaper. Samma material återvanns 14 gånger för att få en bild av att hur återvinningen påverkar de mekaniska egenskaperna av polypropen. Jämförelsen av de mekaniska egenskaperna gjordes mellan råmaterialet polypropen och samma material i återvunnen form med en testometrisk dragprovningsmaskin och smält index maskin. Test bitarna, som användes för dragprovsmaskinen, hade formen av ett hundben. Draghållfastheten och Youngs modul testades med hjälp av dragprovsmaskinen. Materialet som användes för smältindex maskinen hade formen av plastgranulat. Smält index maskinen testade smält indexet för plastgranulatet. Materialet återvanns genom användningen av en maskin som bryter ner plastmaterial till fint granulat, som sedan gick att återanvända. Hundbenen tillverkades med hjälp av en formsprutningsmaskin. Slutarbetet gjordes av personligt syfte och intresse. Återvinningsprocessen och testningen gjordes i plast laboratoriet belägen i Arcada - Nylands svenska yrkeshögskola. Arcada stod för materialet och maskinerna som användes för att utföra testerna.