Upgrading the campus network to layer-3
Ahmad, Rizwan (2011)
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201104295298
https://urn.fi/URN:NBN:fi:amk-201104295298
Tiivistelmä
The aim of this project is to upgrade the campus network of Vaasan ammat-tikorkeakoulu (VAMK), University of Applied Sciences. This project is divided into two parts, configuration of the VLAN subnets and configuration of the net-work routing.
This thesis focuses on configuration of VLANs, configuration of DHCP scopes for subnets, configuration and implementation of network routing such as static and dynamic routing (RIP). The theoretical part explains the basic network fun-damentals and provides enough comprehensive background about the network routing. A major part of theory is devoted to the explanation of VLAN concept and routing protocols.
During the implementation, VLAN subnets are created. DHCP scopes are config-ured for each subnet to get IP addresses and finally static and dynamic routing is configured to fulfil the network demands. After the completion of implementa-tion, tests have been made to verify the practical work. All the tests were success-fully completed and a detailed report is in the results & analysis.
After the implementation, VAMK campus network is changed to Layer 3 net-work. Even access layer switches are configured to do the routing. Implementa-tion of the routing at the edge of the network provides greater security, scalability, control and bandwidth conservation.
This thesis focuses on configuration of VLANs, configuration of DHCP scopes for subnets, configuration and implementation of network routing such as static and dynamic routing (RIP). The theoretical part explains the basic network fun-damentals and provides enough comprehensive background about the network routing. A major part of theory is devoted to the explanation of VLAN concept and routing protocols.
During the implementation, VLAN subnets are created. DHCP scopes are config-ured for each subnet to get IP addresses and finally static and dynamic routing is configured to fulfil the network demands. After the completion of implementa-tion, tests have been made to verify the practical work. All the tests were success-fully completed and a detailed report is in the results & analysis.
After the implementation, VAMK campus network is changed to Layer 3 net-work. Even access layer switches are configured to do the routing. Implementa-tion of the routing at the edge of the network provides greater security, scalability, control and bandwidth conservation.