Optimizing the product architecture of the generators for product configuration

Loading...
Thumbnail Image
Journal Title
Journal ISSN
Volume Title
School of Engineering | Master's thesis
Date
2012
Major/Subject
Koneensuunnitteluoppi
Mcode
Kon-41
Degree programme
Language
en
Pages
(7) + 108
Series
Abstract
This thesis is written for a global power and automation technology company called ABB. The primary purpose of the thesis is to be a pre-study concerning product configuration. Product configuration means systematical product variation that enables to produce customized product variants for different customers with minimized effort. There are two research objectives for the thesis. First one concerns the product architecture that divides products in a reasonable way, and the other one concerns product configurators that are used to configure products. The first objective is to produce guidelines how the product architectures should be designed, and the other objective is to point out the main aspects to be considered as configurators are selected. To achieve the objectives, the thesis presents different types of generators, how mass customization can be done in practice, what type of product architectures can be identified, what are modules, and the order fulfilment process of configurated products. Throughout the literature research, the research questions are answered, and the answers are applied into practice via a case example. One widely accepted approach to establish product architecture is to divide the structure based on its functionalities. However, this approach has not yielded the desired results in many cases as it typically considers only technical decisions. Product architectures have also many other impacts to the product and thus should be established by taking account the company's strategy, organizational structure, process structure, and value chains. This can be achieved by using a Company Strategic Landscape model which indicates the most important aspects concerning the product architecture of a specific product or a company. Product configurators can be used for several reasons in the order fulfilment process. Typically, they can be divided to configurators used by the sales, engineers, and production. The best configuration system would be certain in which only one configurator selects the desired options and the others automatically derive their output based on this configuration. The most applicable configurators are the ones that have divided the configuration engine and configuration models (i.e., proper variant combinations) from each other. To ease the management of the configuration models, they should be handled in PDM/CAD system.

Tämä diplomityö on kirjoitettu globaalille sähkövoima- ja automaatioteknologia yritykselle nimeltä ASS. Tämän työn ensisijainen tarkoitus on olla esiselvitys liittyen tuotekonfigurointiin. Tuotekonfigurointi tarkoittaa systemaattista tuotevariointia, jonka avulla yksilöllisiä tuotevariantteja pystytään valmistamaan eri asiakkaille mahdollisimman pienellä vaivalla. Tällä työllä on kaksi tutkimustavoitetta. Ensimmäinen tavoite liittyy tuotearkkitehtuuriin, joka jakaa tuotteen järkeenkäyvällä tavalla, ja toinen tavoite liittyy tuotekonfiguraattoreihin, joilla konfiguroidaan tuotevariantteja. Ensimmäinen tavoite on tuottaa ohjeistus siitä kuinka tuotearkkitehtuurit tulisi suunnitella. ja toinen tavoite on osoittaa tärkeimmät seikat, jotka tulisi huomioida konfiguraattoreita valittaessa. Tavoitteiden saavuttamiseksi työssä esitellään eri generaattorityypit, kuinka massaräätälöintiä voidaan toteuttaa käytännössä, millaisia tuotearkkitehtuureja on olemassa, mitä moduulit ovat ja konfiguroitujen tuotteiden tilaustoimitusprosessi. Kirjallisuustutkimuksen perusteella vastataan tutkimuskysymyksiin ja vastauksia sovelletaan käytäntöön esimerkkiprojektin avulla. Yksi yleisesti hyväksytty lähestymistapa tuotearkkitehtuurin määrittämiseksi on jakaa rakenne tuotteen toiminnallisuuksien perusteella. Tällä lähestymistavalla ei ole kuitenkaan onnistuttu tuottamaan haluttuja tuloksia monessakaan tapauksessa, koska se liittyy tyypillisesti vain teknisiin ratkaisuihin. Tuotearkkitehtuurit vaikuttavat monella muullakin tavalla tuotteisiin ja siksi niiden määrittämiseksi tulisi huomioida myös yrityksen strategia, organisaatiorakenne, prosessirakenne ja arvoketjut. CSL-malli (Company Strategic Landscape) ottaa nämä huomioon. CSL osoittaa tärkeimmät seikat, jotka liittyvät tietyn tuotteen tai yrityksen tuotteiden tuotearkkitehtuuriin. Tuotekonfiguraattoreita voidaan käyttää moniin tarkoituksiin tilaus-toimitusprosessissa. Tyypillisesti ne pystytään jakamaan myynnin, suunnittelun ja tuotannon käyttämiin konfiguraattoreihin. Paras konfigurointijärjestelmä olisi sellainen. jossa vain yksi konfiguraattori määrittää variantin ominaisuudet ja muut rakentavat oman tuotoksensa tämän perusteella. Käyttökelpoisimmissa konfiguraattoreissa ohjelman logiikka ja konfigurointimallit (variantin mahdolliset ominaisuudet) ovat erotettu toisistaan. Konfigurointimallien käsittelyn helpottamiseksi niitä tulisi käsitellä PDM/CAD järjestelmässä.
Description
Supervisor
Ekman, Kalevi
Thesis advisor
Kamppuri, Janne
Keywords
product architecture, tuotearkkitehtuuri, product configuration, tuotekonfigurointi, configurator, konfiguraattori, modularity, modulaarisuus, module, moduuli
Other note
Citation