Ozone-based batch atomic layer deposited Al2O3 for effective surface passivation

Loading...
Thumbnail Image
Journal Title
Journal ISSN
Volume Title
A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
This publication is imported from Aalto University research portal.
View publication in the Research portal
View/Open full text file from the Research portal
Date
2013
Major/Subject
Mcode
Degree programme
Language
en
Pages
890-894
Series
ENERGY PROCEDIA, Volume 38
Abstract
In this paper we compare water and ozone as oxidants in the Al2O3 ALD reaction in terms of surface passivation quality. The experiments show that O3 produces a high negative charge density up to 7-1012 cm−2 even in as-deposited film, which is different from water based Al2O3 that requires a separate annealing step to activate the negative charge. In general, the ozone process produces lower interface defect density (Dit) and higher negative charge density, which contributes to the higher lifetime value than corresponding water process. Most importantly, ozone-based Al2O3 shows much better firing stability than water-based Al2O3. Ozone concentration is also shown to play a role in the surface passivation quality. Finally, we found out that inserting a water pulse after the ozone pulse can lower the Dit further resulting in even higher lifetime.
Description
Keywords
Atomic layer deposition, ozone, aluminum oxide, Si surface passivation
Other note
Citation
von Gastrow , G , Li , S , Repo , P , Bao , Y , Putkonen , M & Savin , H 2013 , ' Ozone-based batch atomic layer deposited Al2O3 for effective surface passivation ' , Energy Procedia , vol. 38 , pp. 890-894 . https://doi.org/10.1016/j.egypro.2013.07.361