Kartongin päällystemuovin saumausominaisuuksien modifiointi pintakuvioinnilla
Sinkkonen, Sam (2021)
Kandidaatintyö
Sinkkonen, Sam
2021
School of Energy Systems, Konetekniikka
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2021052131160
https://urn.fi/URN:NBN:fi-fe2021052131160
Tiivistelmä
Kandidaatintyön tavoitteena oli tutkia kartongin päällystemuovin saumausominaisuuksien modifiointia pintakuvioinnilla eli kartonkiin tehtävän kohokuvioinnin vaikutusta kansikalvon avattavuuteen. Työssä tutkittiin pääasiassa erilaisia kohokuvioinnissa käytettäviä kokeellisia kuvioita ja niiden vaikutusta kansikalvon avattavuuteen.
Kirjallisuuskatsauksessa käytiin lävitse tärkeimmät kohokuviointimenetelmät ja hieman niiden historiaa. Laboratorio kokeissa hyödynnettiin kirjallisuuskatsauksessa läpi käytyä tietoa kohokuviointimenetelmistä. Aiemman tutkimuksen puutteellisuuden takia kohokuviointiin käytettävät muotit suunniteltiin itse ja käyttöön otettavat muotit valittiin ohjaajien avustuksella. Käytännön koe suoritettiin LUT-yliopiston pakkaustekniikan laboratoriossa ja käytetyt tutkimusmenetelmät käydään lävitse menetelmät osiossa.
Kansikalvon avattavuutta tutkittiin peel-kokeella ja saatuja tuloksia analysoitiin Excel - ohjelman avulla. Tuloksissa käydään lävitse kohokuviointiin käytettävien muottien suunnitteluprosessi sekä virhetarkastelu. Tulokset analysoitiin ja esiteltiin avaukseen vaaditun keskimääräisen voiman sekä voimasiirtymä mukaan. Lopuksi esiteltiin tuotettu uusi tieto. Yhteenvedossa käydään lyhyesti läpi työlle asetettujen tavoitteiden täyttyminen. The aim of the bachelor's thesis was to study the modification of surface sealing properties of paperboard polymer with embossing. In other words, that means the effect of embossing on paperboard on the peelability of the lidding film. The work mainly investigated various patterns used in embossing and their effect on the openability of the cover film.
The literature review went through the main embossing methods and a bit of their history. The laboratory experiments utilized the information from the literature review. Due to the lack of previous research, the tools for embossing were designed independently and the tools to be used were selected with the help of supervisors. The practical test was performed in the laboratory of Packaging Technology LUT University. The research methods used are reviewed in the methods section.
The peelability of the lidding film was examined with a peel test and the obtained results were analyzed by using Excel program. The results section goes through the design process of the molds used for embossing and the error analysis. The results were analyzed and presented according to graphs of the load curve and average force required for peeling the lidding film After this the new information produced was presented. The summary briefly reviews the fulfillment of the goals set for the thesis.
Kirjallisuuskatsauksessa käytiin lävitse tärkeimmät kohokuviointimenetelmät ja hieman niiden historiaa. Laboratorio kokeissa hyödynnettiin kirjallisuuskatsauksessa läpi käytyä tietoa kohokuviointimenetelmistä. Aiemman tutkimuksen puutteellisuuden takia kohokuviointiin käytettävät muotit suunniteltiin itse ja käyttöön otettavat muotit valittiin ohjaajien avustuksella. Käytännön koe suoritettiin LUT-yliopiston pakkaustekniikan laboratoriossa ja käytetyt tutkimusmenetelmät käydään lävitse menetelmät osiossa.
Kansikalvon avattavuutta tutkittiin peel-kokeella ja saatuja tuloksia analysoitiin Excel - ohjelman avulla. Tuloksissa käydään lävitse kohokuviointiin käytettävien muottien suunnitteluprosessi sekä virhetarkastelu. Tulokset analysoitiin ja esiteltiin avaukseen vaaditun keskimääräisen voiman sekä voimasiirtymä mukaan. Lopuksi esiteltiin tuotettu uusi tieto. Yhteenvedossa käydään lyhyesti läpi työlle asetettujen tavoitteiden täyttyminen.
The literature review went through the main embossing methods and a bit of their history. The laboratory experiments utilized the information from the literature review. Due to the lack of previous research, the tools for embossing were designed independently and the tools to be used were selected with the help of supervisors. The practical test was performed in the laboratory of Packaging Technology LUT University. The research methods used are reviewed in the methods section.
The peelability of the lidding film was examined with a peel test and the obtained results were analyzed by using Excel program. The results section goes through the design process of the molds used for embossing and the error analysis. The results were analyzed and presented according to graphs of the load curve and average force required for peeling the lidding film After this the new information produced was presented. The summary briefly reviews the fulfillment of the goals set for the thesis.