Influence of the axial turbine design parameters on the stator–rotor axial clearance losses
Grönman, Aki; Turunen-Saaresti, Teemu; Röyttä, Pekka; Jaatinen-Värri, Ahti (2014)
Post-print / final draft
Grönman, Aki
Turunen-Saaresti, Teemu
Röyttä, Pekka
Jaatinen-Värri, Ahti
2014
Sage Journals
This publication is protected by copyright. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2018052324449
https://urn.fi/URN:NBN:fi-fe2018052324449
Tiivistelmä
The drive towards lower emissions in aerospace engines promotes more efficient and physically smaller engines. One way to decrease the size of the axial turbine is to minimize the distance between successive stator and rotor rows. This can usually have either a positive or negative influence on the turbine performance. The reasons for this behaviour are not currently fully understood. In this study, a novel approach is taken to find new insights into this design question by analysing the influence of different design parameters on the turbine efficiency behaviour. Several different turbines are analysed using the literature. For the first time, the performed analysis reveals the design parameters, which correlate with the different efficiency curve shapes. The correlating parameters are the stator-rotor axial clearance, stator pitch to axial chord ratio, turning velocity Mach number and rotor aspect ratio. The mechanisms behind the found correlations are further analysed to connect the physical phenomena with the design parameters.
Lähdeviite
Grönman, A., Turunen-Saaresti, T., Röyttä, P., Jaatinen-Värri, A. (2014). Influence of the axial turbine design parameters on the stator–rotor axial clearance losses. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 228(5). 482-490. DOI:10.1177/0957650914531949
Kokoelmat
- Tieteelliset julkaisut [1333]
Samankaltainen aineisto
Näytetään aineisto, joilla on samankaltaisia nimekkeitä, tekijöitä tai asiasanoja.
-
Importance of the vane exit mach number on the axial clearance-related losses
Grönman, Aki; Biester, Marc H.-O.; Turunen-Saaresti, Teemu; Jaatinen-Värri, Ahti; Backman, Jari; Seume, Jörg R. (Sage Journals, 2016)More efficient and physically smaller axial turbine designs are promoted to lower emissions and increase revenue. The physical size and the weight of the axial turbine can be minimised by adjusting the distance between ... -
Theoretical and Experimental Analysis of Dynamic Loading of a Two-stage Aircraft Engine Fuel Pump and Methods for Its Decreasing
Gafurov, Salimzhan
Acta Universitatis Lappeenrantaensis (Lappeenranta University of Technology, 10.11.2017)Aircraft fuel pumps are known to be the most loaded units of the gas turbine engines. Primary engine fuel pump is the key component limiting the reliability and endurance of the fuel system, and, as a result, the durability ... -
Aksiaalisen tehojakauman poikkeaman säädön mallintaminen simulointiympäristöön ja sen virheen arviointi painevesilaitoksella
Savolainen, Pyry (2018)Olkiluoto 3:n reaktorisydän käyttää automaatiota hallitakseen reaktorin tilaa. Teollisuuden Voima Oyj:n Polttoainelaskenta- ja valvonta -yksikkö käyttää reaktorisydämen analyyseihin Studsvikin Core Management System ...