Flocculation/deflocculation of cellulosic materials and mineral particles by polyelectrolyte complexes and nanocelluloses

Loading...
Thumbnail Image
Journal Title
Journal ISSN
Volume Title
School of Chemical Technology | Doctoral thesis (article-based) | Defence date: 2015-07-02
Checking the digitized thesis and permission for publishing
Instructions for the author
Date
2015
Major/Subject
Mcode
Degree programme
Language
en
Pages
88 + app. 46
Series
Aalto University publication series DOCTORAL DISSERTATIONS, 83/2015
Abstract
In this work, the aim was to study flocculation, reflocculation and deflocculation phenomena with different chemical combinations. The flocculation of fillers (kaolin and PCC) was studied with polyelectrolyte complexes (PEC) with different combinations of cationic and anionic polyacrylamides. The effect of different cellulose nanofibrils (CNF) on the flocculation and retention of fillers was also studied in this thesis. Experiments were made with single component CNFs and also combining CNFs with different polyelectrolytes. Deflocculation kinetics was studied by adding anionic high molecular weight polyacrylamides (APAM) to high consistency fiber suspensions. The flocculation tests were made with the Turbiscan online device and retention of fillers with the Dynamic drainage jar (DDJ) device and deflocculation with a Focused Beam Reflectance Measurement (FBRM) device. Adsorption studies with the QCM-D (Quartz Crystal Microbalance with Dissipation, dewatering with DDA (Dynamic Drainage Analyzer) and rheology with the dynamic rotational rheometer were also made. Results show that PECs can enhance flocculation and reflocculation capacity significantly in comparison with the corresponding single polyelectrolytes and they can also be used in significantly wider concentration ranges. One of the important findings of this work was that one of the components of PECs should be a high molecular weight polyelectrolyte so that the PEC could effectively form polymer bridges between filler particles. More specifically, the component in excess in the PEC should have a higher or the same molecular weight than the other component. Different CNFs can also be used as effective flocculants alone and also in combination with polyelectrolytes. However, in order to flocculate effectively, CNFs have to be chemically modified to have a high number of charged groups in order to increase the electro- static interactions with filler and fines in the system. CNF systems also showed significant reflocculation, which is unusual for polymeric single flocculant systems. With anionic high molecular weight polyacrylamides, the positive effects are quickly diminished due to shear forces, and therefore, the best deflocculating effect is achieved in as short contact time as possible. The high molecular weight of APAM was shown to be beneficial to deflocculation and there is an optimum dosage level after which deflocculating effect starts to decrease. APAMs had a significant deteriorating effect on dewatering that was highly dependent on the contact time of the pulp suspension with APAM. This thesis presents new retention aid concepts and new information on flocculation and deflocculation kinetics with PECs, CNFs and APAMs. This knowledge could be useful in papermaking and also in other industrial fields such as in water treatment.

Tässä työssä tutkittiin flokkaantumista, uudelleenflokkaantumista ja deflokkaantumista erilaisilla kemikaalikonsepteilla. Täyteaineiden flokkaantumista ja uudelleenflokkaantumista ja flokkien kestävyyttä tutkittiin polyelektrolyyttikomplekseilla. Työssä testattiin useita erilaisia kationisten ja anionisten polyakryyliamidien kombinaatioita. Työssä tutkittiin myös eri nanoselluloosien vaikutusta täyteaineiden flokkaantumiseen ja niiden retentioon. Kokeita tehtiin yksittäisillä nanoselluloosilla sekä yhdistämällä niitä polyelektrolyyttien kanssa. Deflokkauskokeet tehtiin korkeasakeuksisissa kuitususpensioissa, joihin lisättiin korkean molekyylipainon anionisia polyakryyliamideja (APAM). Flokkauskokeet tehtiin Turbiscan Online laitteella, retentiokokeet Dynamic Drainage Jar laitteella (DDJ) ja deflokkauskokeet Focused Beam Reflectance Measurement laitteella (FBRM). Näiden lisäksi mittauksissa käytettiin QCM-D (Quartz Crystal Microbalance) laitetta, DDA (Dynamic Drainage Analyzer) laitetta sekä reometriä.Tulokset osoittavat, että polyelektrolyyttikompleksit parantavat huomattavasti flokkaustehokkuutta ja niiden tehokas konsentraatioalue on huomattavasti laajempi kuin yksikomponenttijärjestelmissä. Uudelleenflokkaantuvuus on myös selkeästi parempi. Polyelektrolyyttikompleksien komponenteilla on suuri vaikutus niiden tehokkuuteen. Työssä havaittiin, että toisen komponentin pitää olla molekyylipainoltaan korkea, jotta sillanmuodostus täyteainepartikkelien välillä olisi riittävän suuri. Nanoselluloosilla voidaan myös merkittävästi parantaa täyteaineiden flokkaantuvuutta ja retentiota. Niitä voidaan käyttää yksin tai yhdessä polyelektrolyyttien kanssa, mutta niiden pitää olla kemiallisesti muokattuja, jotta niissä olisi tarpeeksi varattuja ryhmiä riittävän elektrostaattisen vuorovaikutuksen takaamiseksi. Uudelleenflokkaantuvuuden havaittiin olevan myös erittäin hyvä nanoselluilla, mikä on tavallisesti poikkeuksellista yksikomponenttisysteemeille. Deflokkauskokeissa havaittiin, että APAM:ien vaikutus heikkenee nopeasti leikkausvoimien vaikutuksesta, joten paras deflokkausvaikutus saadaan mahdollisimman lyhyellä kontaktiajalla. Kokeissa havaittiin myös, että korkeampi molekyylipaino on hyödyllistä deflokkaukselle ja, että deflokkulanteilla on optimaalinen annostaso, jonka jälkeen niiden vaikutus heikkenee. APAM:lla on huomattava vedenpoistoa heikentävä vaikutus, joka on erittäin paljon riippuvainen kontaktiajasta APAM:n ja kuitususpension välillä. Tämä työ esittelee uusia flokkaus- ja retentioaineyhdistelmiä, sekä antaa uutta tietoa polyelektrolyyttikompleksien, nanoselluloosien sekä APAM:ien flokkaus, uudelleenflokkaus sekä deflokkauskinetiikasta, josta voi tulevaisuudessa olla hyötyä paperinvalmistuksessa sekä muilla teollisuuden aloilla, kuten esimerkiksi vedenkäsittelyssä.
Description
Supervising professor
Laine, Janne, Prof., Aalto University, Department of Forest Products Technology, Finland
Thesis advisor
Rojas, Orlando, Prof., Aalto University, Department of Forest Products Technology, Finland
Holappa, Susanna, Dr., Kemira, Finland
Keywords
flocculation, nanocellulose, polyelectrolyte complexes, mineral particles, flokkaus, nanoselluloosa, polyelektrolyyttikompleksi, mineraalipartikkeli
Other note
Parts
  • [Publication 1]: Korhonen, Markus; Holappa, Susanna; Stenius, Per; Laine, Janne; 2013. Flocculation of fillers with polyelectrolyte complexes. Nordic Pulp and Paper Research Journal, 28, 2, 239-247. ISSN: 0283-2631.
    DOI: 10.3183/NPPRJ-2013-28-02-p239-247 View at publisher
  • [Publication 2]: Korhonen, Markus; Rojas, Orlando; Laine, Janne; 2015. Effect of charge balance and dosage of polyelectrolyte complexes on the shear resistance of mineral floc strength and reversibility. Journal of Colloid and Interface Science, 448, 73-78. ISSN: 0021-9797.
    DOI: 10.1016/j.jcis.2015.01.075 View at publisher
  • [Publication 3]: Korhonen, Markus; Laine, Janne; 2014. Flocculation and retention of fillers with nanocelluloses. Special issue: NANOCELLULOSE, Nordic Pulp and Paper Research Journal, 29, 1, 119-128. ISSN: 0283-2631.
    DOI: 10.3183/NPPRJ-2014-29-01-p119-128 View at publisher
  • [Publication 4]: Korhonen, Markus; Karppinen, Anni; Saarinen, Tapio; Seppälä, Jukka; Laine, Janne; 2014. Deflocculation of Cellulosic Suspensions with Anionic High Molecular Weight Polyelectrolytes, Bioresources, 9, 2, 3550-3570. ISSN:1930-2126.
Citation